

| Parameter | Value |
|---|---|
| GTIN | 4046356866743 |
| Orderkey | 1409239 |
| (Material) | -30 °C ... 90 °C (cable, flexible installation) |
| Packing unit | 1 |
| (Dimensions) | -40 °C ... 85 °C (without mechanical actuation) |
| UNSPSC 11 (ETIM) | 43172015 |
| ETIM 4.0 (eCl@ss) | EC001121 |
| ETIM 5.0 (eCl@ss) | EC001121 |
| ETIM 6.0 (eCl@ss) | EC001121 |
| ETIM 7.0 (eCl@ss) | EC001121 |
| UNSPSC 13.2 (ETIM) | 39121413 |
| UNSPSC 6.01 (ETIM) | 43172015 |
| UNSPSC 12.01 (ETIM) | 43201404 |
| Custom tariff number | 85444290 |
| UNSPSC 7.0901 (ETIM) | 43201404 |
| Cable type (Material) | TPE litz wire |
| Wire colors (Material) | Black, brown,blue, white, gray |
| Note (Ambient conditions) | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| AWG signal line (Material) | 23 |
| Contact material (General) | CuZn |
| Material, knurls (General) | Zinc die-cast, nickel-plated |
| Sealing material (General) | FKM |
| Coding (Ambient conditions) | A - standard |
| Torque (Ambient conditions) | 3 Nm ... 4 Nm (Installation-side) |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Standard designation (Cable) | M12 connector |
| eCl@ss 4.0 (Classifications) | 272607xx |
| eCl@ss 4.1 (Classifications) | 27260701 |
| eCl@ss 5.0 (Classifications) | 27260701 |
| eCl@ss 5.1 (Classifications) | 27143400 |
| eCl@ss 6.0 (Classifications) | 27279200 |
| eCl@ss 7.0 (Classifications) | 27440103 |
| eCl@ss 8.0 (Classifications) | 27440103 |
| eCl@ss 9.0 (Classifications) | 27440102 |
| Conductor material (Material) | Tin-plated Cu litz wires |
| Standards/regulations (Cable) | IEC 61076-2-101 |
| Test voltage, cable (Material) | 3000 V |
| Conductor resistance (Material) | ≤ 80 mΩ/m |
| Insulation resistance (Material) | ≥ 20 MΩ*km |
| Thickness, insulation (Material) | 0.21 mm |
| Degree of protection (Dimensions) | IP67 |
| Nominal voltage, cable (Material) | 300 V |
| Conductor cross section (Material) | 0.25 mm² |
| Contact carrier material (General) | PA 6.6 |
| Contact surface material (General) | Au |
| Mounting type (Ambient conditions) | Rear mounting Pg9 With flat nut |
| Rated voltage (Ambient conditions) | 60 V |
| Standards/specifications (Material) | M12 connector IEC 61076-2-101 |
| Status display (Ambient conditions) | No |
| Length of cable (Key Commercial Data) | 0.5 m |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Connection method (Ambient conditions) | Individual wires |
| REACh SVHC (Standards and Regulations) | |
| Degree of pollution (Ambient conditions) | 3 |
| Material conductor insulation (Material) | TPE |
| Number of positions (Ambient conditions) | 5 |
| Rated surge voltage (Ambient conditions) | 1.5 kV |
| Overvoltage category (Ambient conditions) | III |
| Signal type/category (Ambient conditions) | Universal |
| Ambient temperature (operation) (Material) | -40 °C ... 105 °C (cable, fixed installation) |
| Conductor structure signal line (Material) | 7x 0.15 mm |
| Insulation resistance (Ambient conditions) | ≥ 100 MΩ |
| Standards/regulations (Ambient conditions) | M12 connector IEC 61076-2-101 |
| Rated current at 40°C (Ambient conditions) | 4 A |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 85 °C (Plug / socket) |
| Core diameter including insulation (Material) | 1.15 mm ±0.07 mm |
| Flammability rating according to UL 94 (Cable) | V0 |
| Flammability rating according to UL 94 (General) | V0 |
| Insertion/withdrawal cycles (Ambient conditions) | > 100 |
Technical specifications and performance data
Installation and operation guide