

| Parameter | Value |
|---|---|
| 6 mm | |
| Coding | A |
| General | Lock nut is included in the scope of delivery |
| Shielded | yes |
| Head design | Socket |
| Thread type | M12 |
| Product type | Circular connectors (device side) |
| Mounting type | Rear mounting Pg9 With flat nut |
| Seal material | NBR |
| Contact material | CuZn |
| Head thread type | M12 |
| Connection method | Solder pins |
| Head cable outlet | straight |
| Head locking type | SPEEDCON |
| Tightening torque | 3 Nm |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A |
| Nominal voltage UN | 60 V |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 5 |
| Rated surge voltage | 1.5 kV |
| Degree of protection | IP67 (When plugged in) |
| Overvoltage category | II |
| Standard designation | M12 connector |
| Assembly instructions | With flat nut |
| Insulation resistance | ≥ 100 MΩ |
| Contact connection type | Socket |
| Contact carrier material | PA 6.6 |
| Contact surface material | Au |
| Length of the solder pin | 6 mm |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -25 °C ... 85 °C (Plug / socket) |
| Flammability rating according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide