SACC-CIP-M8FSB-5P SMD T

Parameter	Value
	30 V DC
Coding	B
Shielded	no
Bus system	DeviceNet™
Application	Data/signal
Head design	Socket
Sensor type	Universal
Thread type	M8
Product type	Contact insert
Seal present	yes
Mounting type	PCB mounting
Seal material	FKM
Article revision	01
Contact material	CuZn
Head thread type	M8
Connection method	SMD reflow
Head cable outlet	straight
Type of packaging	Tray
Contact resistance	≤ 3 mΩ
Nominal current IN	3 A
Nominal voltage UN	30 V AC
Notes on operation	The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Number of positions	5
Degree of protection	IP67
Overvoltage category	III
Signal type/category	Universal
Standard designation	M8 connector
Insulation resistance	≤ 100 MΩ
Contact carrier material	PA
Contact surface material	Au
Standards/specifications	IEC 61076-2-104
Ambient temperature (operation)	-25 °C ... 105 °C (Plug / socket)
Degree of protection (when plugged in)	IP67 (correctly plugged in and locked)
Flammability rating according to UL 94	V0

Built-in mounting female for sensors/actuators, 5-pole, B-coded, M8, SMD

Technical specifications and performance data

Installation and operation guide

SACC-CIP-M8FSB-5P SMD T 1412229 PHOENIX CONTACT Flush-type connector