

| Parameter | Value |
|---|---|
| IP67, in the installed condition | |
| Link | SMD Reflow |
| note | Compliant |
| Coding | at |
| Shielded | no |
| Packaging | Belt |
| Application | Signal |
| Thread type | M12 |
| No. of poles | 12 |
| Product Type | Contact insert |
| General notes | The electrical and mechanical data indicated include a pair of connectors correctly locked and mounted. If the connector is in the unlocked state and there is a risk of pollution, the connector must be closed with an IP54 > protective cap. Also take into account influences via wires, lines or mounting on reinforced concrete. |
| Mounting type | Mounting the printed circuit boards |
| Gasket present | no |
| Head structure | Connector |
| Delivery status | with included pad |
| Contact Material | CuZn |
| Head Thread Type | M12 |
| Mass Resistivity | ≤ 3 mΩ |
| Rated Current IN | 1.5 A |
| Rated voltage UN | 30 V |
| Head cable outlet | right |
| Manoeuvring cycles | > 100 |
| Degree of pollution | 3 |
| Standard Definition | M12 connector |
| Degree of protection | IP67 (properly engaged and locked) |
| Overvoltage Category | Iii |
| Insulation Resistance | ≥ 100 MΩ |
| Standards/Regulations | IEC 61076-2-101 |
| Sizing Impulse Voltage | 0.8 kV |
| Contact Insert Material | PA |
| Contact Surface Material | Au |
| Conductor cross-section AWG | (converted according to IEC) |
| Ambient temperature (operating) | -55 °C ... 105 °C (Female Connector / Connector) |
| Degree of protection (connected) | IP67 (properly engaged and locked) |
| Combustibility class according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide