

| Parameter | Value |
|---|---|
| Signal | |
| Coding | D |
| Application | Data |
| Head design | Socket |
| Product type | Contact insert |
| Mounting type | PCB mounting |
| Seal material | FKM / EPDM |
| Article revision | 04 |
| Contact material | CuZn |
| Connection method | Solder pins |
| Head cable outlet | angled |
| Contact resistance | ≤ 3 mΩ |
| Nominal current IN | 4 A |
| Nominal voltage UN | 250 V |
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Degree of pollution | 3 |
| Number of positions | 4 |
| Rated surge voltage | 2.5 kV |
| Degree of protection | IP67 |
| Overvoltage category | II |
| Standard designation | M12 connector |
| Insulation resistance | ≥ 100 MΩ |
| Contact carrier material | PA 6.6 |
| Contact surface material | Au |
| Standards/specifications | IEC 61076-2-101 |
| Insertion/withdrawal cycles | > 100 |
| Ambient temperature (operation) | -40 °C ... 85 °C (cable, fixed installation) |
| Flammability rating according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide