

| Parameter | Value |
|---|---|
| IP67, when in locked state | |
| Note | Push-pull |
| General | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
| Material | Brass, nickel-plated |
| Head design | Pin |
| Thread type | M12 |
| Product type | Panel mounting base |
| Mounting type | Rear mounting |
| Seal material | FKM |
| Head thread type | M12 |
| Connection method | SMD |
| Cross section AWG | (converted acc. to IEC) |
| Head locking type | Push-Pull |
| Degree of protection | IP67 (correctly plugged in and locked) |
| Standard designation | M12 connector |
| Material of grip body | Brass, nickel-plated |
| Standards/specifications | IEC 61076-2-010 |
| Insertion/withdrawal cycles | > 100 |
| Material for screw connection | Brass, nickel-plated |
| Ambient temperature (operation) | -40 °C ... 85 °C (without mechanical actuation) |
| Degree of protection (when plugged in) | IP67 (correctly plugged in and locked) |
| Flammability rating according to UL 94 | V0 |
Technical specifications and performance data
Installation and operation guide