

| Parameter | Value |
|---|---|
| 120 V DC | |
| LED | no |
| Width | 54 mm |
| Coding | A |
| Height | 26 mm |
| Length | 155 mm |
| Application | Standard |
| Product type | Distributor box |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Number of slots | 8 |
| Contact material | CuSn |
| Material Housing | PA |
| Connection method | M23 plug connection |
| Nominal voltage UN | 120 V AC |
| Dimensional drawing | |
| Note on application | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Number of positions | 5 |
| Degree of protection | IP65 |
| Rated current, total | 12 A |
| Seal material O-ring | NBR |
| Status display present | No |
| Contact carrier material | PA |
| Contact surface material | Ni/Au |
| Material Threaded sleeve | PA |
| Max. operating voltage Umax | 135 V |
| Ambient temperature (operation) | -20 °C ... 75 °C |
| Sensor/actuator connection system | M12 socket |
| Current carrying capacity per slot | 4 A |
| Flammability rating according to UL 94 | V0 |
| Material of contact, master cable side | CU alloy |
| Max. current carrying capacity per path | 2 A |
| Slot/position = Wire color or connection | 1 / 4 (A) = 15 |
| Tightening torque slot sensor/actuator cable | 0.4 Nm |
| Material of contact surface, master cable side | gold-plated |
Technical specifications and performance data
Installation and operation guide