

| Parameter | Value |
|---|---|
| GTIN | 4046356455626 |
| Note | Made to Order (non-returnable) |
| Orderkey | 1437232 |
| Catalog page | Page 271 (C-2-2017) |
| Packing unit | 1 pc |
| Country of origin | PL (Poland) |
| Custom tariff number | 85366990 |
| (Ambient conditions) | Status display I/O Yellow LED |
| (Insulation material) | 1-8 / 5 (PE) = PE |
| (Key Commercial Data) | |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Degree of protection (General) | IP54 (with sealed mounting holes) |
| Rated voltage (Key Commercial Data) | 24 V DC |
| Weight per Piece (excluding packing) | 362.300 g |
| Number of slots (Key Commercial Data) | 8 |
| Standard designation (Pin assignment) | M12 connector |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Local diagnostics (Ambient conditions) | Supply voltage Green LED |
| Standards/regulations (Pin assignment) | IEC 61076-2-101 |
| Ambient temperature (operation) (General) | -30 °C ... 80 °C |
| Number of positions (Key Commercial Data) | 5 |
| Total rated current (Key Commercial Data) | 8 A |
| Connection method (Local diagnostics function) | Rear plug-in spring connection |
| Ambient temperature (storage/transport) (General) | -30 °C ... 90 °C |
| Max. operating voltage Umax (Key Commercial Data) | 30 V DC |
| O-ring material (Master cable data/connection data) | NBR |
| Contact material (Master cable data/connection data) | Cu alloy |
| Housing material (Master cable data/connection data) | PBT |
| Sealing material (Master cable data/connection data) | CR (flat gasket on the back) |
| Stripping length (signal) (Local diagnostics function) | 9 mm |
| Sensor/actuator connection system (Key Commercial Data) | M12-SPEEDCON-socket |
| Current carrying capacity per slot (Key Commercial Data) | 4 A |
| Contact carrier material (Master cable data/connection data) | PA |
| Contact surface material (Master cable data/connection data) | gold-plated |
| Current carrying capacity per I/O signal (Key Commercial Data) | 2 A |
| Slot/position = Wire color or connection (Insulation material) | 1 / 4 (A) = 1 / 4 |
| Material of threaded sleeve (Master cable data/connection data) | Zinc die-cast |
| Material of the moulding mass (Master cable data/connection data) | PUR |
| Conductor cross section max. (energy) (Local diagnostics function) | 1.5 mm² |
| Conductor cross section max. (signal) (Local diagnostics function) | 1.5 mm² |
| Conductor cross section min. (energy) (Local diagnostics function) | 0.14 mm² |
| Conductor cross section min. (signal) (Local diagnostics function) | 0.14 mm² |
| Conductor cross section AWG max. (energy) (Local diagnostics function) | 16 |
| Conductor cross section AWG max. (signal) (Local diagnostics function) | 16 |
| Conductor cross section AWG min. (energy) (Local diagnostics function) | 26 |
| Conductor cross section AWG min. (signal) (Local diagnostics function) | 26 |
| Material of threaded sleeve surface (Master cable data/connection data) | Nickel-plated |
| Tightening torque slot sensor/actuator cable (Local diagnostics function) | 0.4 Nm |
| Material of contact, master cable side (Master cable data/connection data) | CU alloy |
| Material of contact surface, master cable side (Master cable data/connection data) | tin-plated |
| Tightening torque of mounting screw for fixing the housing (Local diagnostics function) | 0.5 Nm |
| Material of the contact carrier on the master cable side (Master cable data/connection data) | PA |
Technical specifications and performance data
Installation and operation guide