

| Parameter | Value |
|---|---|
| Status display I/O Yellow LED | |
| LED | yes |
| Width | 54 mm |
| Coding | A |
| Height | 19 mm |
| Length | 149 mm |
| Application | Standard |
| Product type | Header with metric measurement slots |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| Number of slots | 8 |
| Contact material | Cu alloy |
| Material Housing | PBT |
| Connection method | Pluggable screw connection |
| Local diagnostics | Supply voltage Green LED |
| Monitored function | Supply voltage |
| Nominal voltage UN | 24 V DC |
| Dimensional drawing | |
| Note on application | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Number of positions | 5 |
| Degree of protection | IP65 |
| Rated current, total | 10 A |
| Seal material O-ring | NBR |
| Standard designation | M12 connector |
| Optical representation | Green LED |
| Status display present | Yes |
| Contact carrier material | PA |
| Contact surface material | gold-plated |
| Material Threaded sleeve | PBT |
| Standards/specifications | IEC 61076-2-101 |
| Material Molding compound | PUR |
| Max. operating voltage Umax | 30 V DC |
| Ambient temperature (operation) | -25 °C ... 80 °C |
| Current carrying capacity per slot | 4 A |
| Flammability rating according to UL 94 | V0 |
| Material of contact, master cable side | CU alloy |
| Max. current carrying capacity per path | 2 A |
| Material of contact surface, master cable side | Sn |
| Material of the contact carrier on the master cable side | PA |
Technical specifications and performance data
Installation and operation guide