

| Parameter | Value |
|---|---|
| Application | Food processing industry |
| Cable length | 30 m |
| Product type | Distributor box |
| Assembly note | NOTE:Observe the permissible bending radii when routing cables, since the degree of protection may be at risk if the bending forces are too high. Reduce mechanical loads upstream of the connector, e.g., by using cable ties. |
| AWG signal line | 20 |
| Number of slots | 8 |
| AWG power supply | 17 |
| Contact material | CuSn6 |
| Material Housing | Stainless steel 1.4404 |
| Connection method | Fixed connection |
| Nominal voltage UN | 24 V DC |
| Note on application | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Number of positions | 5 |
| Rated current, total | 12 A |
| Seal material O-ring | FKM |
| Standard designation | M12 connector |
| Status display present | Yes |
| Contact carrier material | PBT |
| Contact surface material | gold-plated |
| Material Threaded sleeve | Stainless steel 1.4404 |
| Standards/specifications | IEC 61076-2-101 |
| Material Molding compound | PUR |
| Max. operating voltage Umax | 30 V DC |
| Sensor/actuator connection system | M12 socket |
| Current carrying capacity per slot | 4 A |
| Max. current carrying capacity per path | 2 A |
| Tightening torque slot sensor/actuator cable | 0.4 Nm |
Technical specifications and performance data
Installation and operation guide