

| Parameter | Value |
|---|---|
| GTIN | 4046356587792 |
| (Cable) | No hazardous substances above threshold values |
| Orderkey | 1445729 |
| (General) | -5 °C ... 80 °C (for flexible installation) |
| (Drawings) | Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
| Packing unit | 1 pc |
| Note (Drawings) | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
| UNSPSC 11 (ETIM) | 31261501 |
| Country of origin | PL (Poland) |
| ETIM 2.0 (eCl@ss) | EC000200 |
| ETIM 3.0 (eCl@ss) | EC001856 |
| ETIM 4.0 (eCl@ss) | EC002585 |
| ETIM 5.0 (eCl@ss) | EC002585 |
| ETIM 6.0 (eCl@ss) | EC002585 |
| ETIM 7.0 (eCl@ss) | EC002585 |
| China RoHS (Cable) | Environmentally friendly use period: unlimited = EFUP-e |
| UNSPSC 13.2 (ETIM) | 31251501 |
| UNSPSC 19.0 (ETIM) | 31251501 |
| UNSPSC 20.0 (ETIM) | 31251501 |
| UNSPSC 21.0 (ETIM) | 31251501 |
| UNSPSC 6.01 (ETIM) | 31261501 |
| UNSPSC 12.01 (ETIM) | 31261501 |
| Custom tariff number | 85444290 |
| UNSPSC 7.0901 (ETIM) | 31261501 |
| (Insulation material) | 1-8 / 5 (PE) = GN/YE |
| Minimum order quantity | 10 pc |
| Rated voltage (Drawings) | 48 V |
| Number of slots (Drawings) | 8 |
| (Standards and Regulations) | -5 °C ... 80 °C (cable, flexible installation) |
| eCl@ss 4.0 (Classifications) | 27140800 |
| eCl@ss 4.1 (Classifications) | 27140800 |
| eCl@ss 5.0 (Classifications) | 27143400 |
| eCl@ss 5.1 (Classifications) | 27250300 |
| eCl@ss 6.0 (Classifications) | 27279200 |
| eCl@ss 7.0 (Classifications) | 27279219 |
| eCl@ss 8.0 (Classifications) | 27279219 |
| eCl@ss 9.0 (Classifications) | 27440108 |
| Degree of protection (General) | IP65 |
| Dimensional drawing (Drawings) | |
| Number of positions (Drawings) | 5 |
| Total rated current (Drawings) | 12 A |
| Length of cable (Ambient conditions) | 15 m |
| Weight per Piece (excluding packing) | 3,940.000 g |
| Shielding (Standards and Regulations) | Tinned copper braided shield |
| Cable type (Standards and Regulations) | PUR/PVC shielded, black |
| Connection method (Ambient conditions) | Fixed connection |
| Wire colors (Standards and Regulations) | brown, blue, green/yellow, white, green, yellow, gray, pink, red, black, violet, gray/pink, red/blue, white/green, brown/green, white/yellow, yellow/brown, white/gray, gray/brown |
| Ambient temperature (operation) (General) | -25 °C ... 70 °C |
| Overall twist (Standards and Regulations) | Wires twisted in layers |
| AWG signal line (Standards and Regulations) | 20 |
| Traversing path (Standards and Regulations) | 2 m |
| Traversing rate (Standards and Regulations) | 2 m/s |
| AWG power supply (Standards and Regulations) | 17 |
| Flame resistance (Standards and Regulations) | DIN EN 50265 |
| Other resistance (Standards and Regulations) | Highly resistant to acids, alkaline solutions and solvents |
| Sensor/actuator connection system (Drawings) | M12 socket |
| Current carrying capacity per slot (Drawings) | 4 A |
| Resistance to oil (Standards and Regulations) | according to VDE 0472 Part 803 |
| Cable abbreviation (Standards and Regulations) | LiYY11Y-HF |
| Conductor material (Standards and Regulations) | Bare Cu litz wires |
| O-ring material (Master cable connection data) | NBR |
| Special properties (Standards and Regulations) | Silicone-free |
| Contact material (Master cable connection data) | Cu alloy |
| Housing material (Master cable connection data) | Aluminum |
| Test voltage, cable (Standards and Regulations) | 2000 V |
| Flammability rating according to UL 94 (Drawings) | V0 |
| External sheath, color (Standards and Regulations) | deep black RAL 9005 |
| Nominal voltage, cable (Standards and Regulations) | 300 V |
| Outer sheath, material (Standards and Regulations) | PUR |
| Conductor cross section (Standards and Regulations) | 16x 0.5 mm² (Signal line) |
| Current carrying capacity per I/O signal (Drawings) | 2 A |
| Number of bending cycles (Standards and Regulations) | 1500000 |
| Schematic diagramM12 slot, socket, 5-pos. (Drawings) | |
| Cable type (abbreviation) (Standards and Regulations) | PUR |
| External cable diameter D (Standards and Regulations) | 11.6 mm ±0,3 mm |
| Contact carrier material (Master cable connection data) | PA |
| Contact surface material (Master cable connection data) | gold-plated |
| Flammability rating according to UL 94 (Pin assignment) | V0 |
| Housing surface material (Master cable connection data) | Nickel-plated |
| Material conductor insulation (Standards and Regulations) | PVC |
| Ambient temperature (operation) (Standards and Regulations) | -40 °C ... 90 °C (cable, fixed installation) |
| Conductor structure signal line (Standards and Regulations) | 64x 0.10 mm |
| Material of the moulding mass (Master cable connection data) | PUR |
| Slot/position = Wire color or connection (Insulation material) | 1 / 4 (A) = WH |
| Conductor structure, voltage supply (Standards and Regulations) | 128x 0.10 mm |
| Tightening torque slot sensor/actuator cable (Ambient conditions) | 0.4 Nm |
| Material of contact, master cable side (Master cable connection data) | CU alloy |
| Minimum bending radius, drag chain applications (Standards and Regulations) | 10 x D |
| Material of contact surface, master cable side (Master cable connection data) | Gold-plated |
Technical specifications and performance data
Installation and operation guide