

| Parameter | Value |
|---|---|
| 30 V DC | |
| Type | free cable end |
| Coding | A |
| Shielded | yes |
| Cable type | PUR, gray, shielded [285] |
| Coding type | A |
| Cable length | 0.5 m |
| Product type | Sensor/actuator cable |
| Test voltage | 1200 V |
| Overall twist | 4 pairs for core |
| Seal material | NBR |
| Twisted pairs | 2 cores to the pair |
| Status display | No |
| AWG signal line | 24 |
| Contact material | CuZn |
| Other resistance | Ozone and UV resistant |
| Resistance to oil | very good oil and chemical resistance |
| Conductor material | Bare Cu litz wires |
| Contact resistance | ≤ 5 mΩ |
| Nominal current IN | 2 A |
| Nominal voltage UN | 30 V AC |
| Single wire, color | white-brown, green-yellow, gray-pink, blue-red |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Max. bending cycles | 3000000 |
| Number of positions | 8 |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | II |
| Insulation resistance | ≥ 100 MΩ |
| Material of grip body | TPU, hardly inflammable, self-extinguishing |
| External sheath, color | gray RAL 7001 |
| Nominal voltage, cable | 350 V |
| Outer sheath, material | PUR |
| Status display present | No |
| Conductor cross section | 4x 2x 0.25 mm² (Signal line) |
| External cable diameter | 7.6 mm ±0.2 mm |
| Optical shield covering | 85 % |
| Contact carrier material | TPU GF |
| Contact surface material | Ni/Au |
| Material wire insulation | PES |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Ambient temperature (operation) | -50 °C ... 80 °C (cable, fixed installation) |
| Conductor structure signal line | 32x 0.10 mm |
| Flammability rating according to UL 94 | HB |
| Minimum bending radius, flexible installation | 7.5 x D |
| Smallest bending radius, movable installation | 57 mm |
Technical specifications and performance data
Installation and operation guide