

| Parameter | Value |
|---|---|
| 60 V DC | |
| Type | Socket angled M12 |
| Coding | A |
| Shielded | no |
| Cable type | PUR irradiated halogen-free orange [150] |
| Coding type | A |
| Cable length | 8 m |
| Halogen-free | The cable is halogen-free |
| Product type | Sensor/actuator cable |
| Test voltage | 2000 V (50 Hz, 5 minutes) |
| Overall twist | 5 cores, twisted |
| AWG signal line | 22 |
| Contact material | CuSn |
| Flame resistance | DIN VDE 0472 part 804, test type B |
| Other resistance | hydrolysis and microbe resistant |
| Conductor material | Bare Cu litz wires |
| Nominal current IN | 4 A |
| Nominal voltage UN | 48 V AC |
| Single wire, color | brown, white, blue, black, green-yellow |
| Special properties | Silicone-free |
| Dimensional drawing | |
| Number of positions | 5 |
| No. of cable outlets | 1 |
| External sheath, color | orange RAL 2003 |
| Nominal voltage, cable | 250 V (AC) |
| Outer sheath, material | PUR |
| Status display present | No |
| Conductor cross section | 4x 0.34 mm² (Signal line) |
| External cable diameter | 5.20 mm ±0.2 mm |
| Contact carrier material | TPU |
| Contact surface material | Ni/Au |
| Material wire insulation | PE |
| Max. conductor resistance | ≤ 57.5 Ω/km (with 0.34 mm² conductor cross section) |
| Insertion/withdrawal cycles | ≥ 100 |
| Ambient temperature (operation) | -50 °C ... 105 °C (cable, fixed installation) |
| Conductor structure signal line | 42x 0.10 mm |
| Dynamic load capacity (bending) | Max. bending cycles: 5000000, Bending radius: 52 mm, Traversing path: 10 m, Traversing rate: 3 m/s |
| Rated voltage in acc. with IEC 61076-2-101 | 60 V |
| Smallest bending radius, fixed installation | 20 mm |
| Smallest bending radius, movable installation | 30 mm |
Technical specifications and performance data
Installation and operation guide