

| Parameter | Value |
|---|---|
| Sn (Contact surface) | |
| Type | free cable end |
| Material | CuSn (Contact) |
| Shielded | no |
| Cable type | PUR black [121] |
| Application | Standard |
| Cable length | 20 m |
| Cable weight | 58.8 kg/km |
| Halogen-free | in accordance with DIN VDE 0472 part 815 |
| Product type | Sensor/actuator cable with valve connector |
| Test voltage | 1200 V |
| UL AWM Style | 20549 |
| Overall twist | 3 wires, twisted |
| Seal material | TPU |
| Status display | 1 LED |
| AWG signal line | 17 |
| Contact material | CuSn |
| Flame resistance | DIN VDE 0482 |
| Other resistance | Low adhesion |
| Resistance to oil | in accordance with DIN EN 60811-2-1 |
| Conductor material | Bare Cu litz wires |
| Nominal current IN | 2 A |
| Nominal voltage UN | 24 V DC |
| Single wire, color | black 1, black 2, green/yellow |
| Special properties | highly flexible |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Number of positions | 3 |
| Degree of protection | IP65 |
| No. of cable outlets | 1 |
| Overvoltage category | III |
| Standard designation | Valve connector |
| Insulation resistance | ≥ 100 MΩ |
| External sheath, color | black RAL 9005 |
| Nominal voltage, cable | 300 V |
| Outer sheath, material | PUR |
| Status display present | Yes |
| Conductor cross section | 3x 1 mm² |
| External cable diameter | 6.00 mm ±0.2 mm |
| Contact surface material | Sn |
| Material wire insulation | PP |
| Standards/specifications | EN 175301-803 |
| Max. conductor resistance | 19.5 Ω/km (at 20 °C) |
| Material housing valve plug | TPU |
| Wire diameter incl. insulation | 2.1 mm ±0.05 mm |
| Ambient temperature (operation) | -40 °C ... 80 °C (cable, fixed installation) |
| Conductor structure signal line | 32x 0.20 mm |
| Dynamic load capacity (bending) | Max. bending cycles: 3000000, Traversing rate: 2.5 m/s, Acceleration: 10 m/s² |
| Valve plug contact insert material | PA 6.6 |
| Flammability rating according to UL 94 | V0 |
| Minimum bending radius, fixed installation | 5 x D |
| Smallest bending radius, fixed installation | 30 mm |
| Minimum bending radius, flexible installation | 10 x D |
| Smallest bending radius, movable installation | 60 mm |
Technical specifications and performance data
Installation and operation guide