In Stock Hot Product
RIF-4-RPT-LDP-24DC/3X21
RIF-4-RPT-LDP-24DC/3X21 2903278 PHOENIX CONTACT Relay Module
$0.00USD
4097 in stock
Key Specifications
GTIN:4046356731652
Orderkey:2903278
(Coil side):1/2 HP, 240 V AC (three-phase induction motor)
Catalog page:Page 359 (C-5-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356731652 |
| Orderkey | 2903278 |
| (Coil side) | 1/2 HP, 240 V AC (three-phase induction motor) |
| Catalog page | Page 359 (C-5-2017) |
| Depth (Note) | 90 mm |
| Packing unit | 5 pc |
| Width (Note) | 43 mm |
| Height (Note) | 111 mm |
| (Contact side) | 26 ... 16 (flexible) |
| Country of origin | DE (Germany) |
| (Connection data 1) | 26 ... 14 (flexible) |
| (Connection data 2) | RT I (Relay) |
| Custom tariff number | 85364110 |
| Insulation (General) | Basic insulation |
| Contact type (Coil side) | 3 PDTs |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgNi |
| Degree of pollution (General) | 2 |
| Rated surge voltage (General) | 4 kV |
| 3-phase motor load (Coil side) | 1500 W |
| Connection name (Contact side) | Coil side |
| Overvoltage category (General) | III |
| Switching capacity (Coil side) | 2 A (at 24 V, DC13) |
| Standards/regulations (General) | DIN EN 50178 |
| Stripping length (Contact side) | 8 mm |
| Connection method (Contact side) | Push-in connection |
| Coil voltage (Ambient conditions) | 24 V DC |
| Maximum inrush current (Coil side) | 50 A (20 ms, N/O contact) |
| Min. switching current (Coil side) | 10 mA (at 24 V) |
| Operating mode (Connection data 2) | 100% operating factor |
| Rated insulation voltage (General) | 250 V AC |
| Type of switch contact (Coil side) | Single contact |
| Connection name (Connection data 1) | Contact side |
| Net weight (SAP) (Connection data 2) | 211 g |
| Stripping length (Connection data 1) | 10 mm |
| Weight per Piece (excluding packing) | 211.000 g |
| Connection method (Connection data 1) | Push-in connection |
| Maximum switching voltage (Coil side) | 440 V AC |
| Minimum switching voltage (Coil side) | 10 V (At 24 mA) |
| Mounting position (Connection data 2) | any |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Limiting continuous current (Coil side) | 10 A (see diagram) |
| Protective circuit (Ambient conditions) | Damping diode |
| Degree of protection (Connection data 2) | IP20 (Relay base) |
| Assembly instructions (Connection data 2) | In rows with zero spacing |
| Typical release time (Ambient conditions) | 20 ms |
| Conductor cross section AWG (Contact side) | 26 ... 16 (solid) |
| Connection in acc. with standard (General) | CSA |
| Motor load according to UL 508 (Coil side) | 1/3 HP, 120 V AC (single-phase AC motor) |
| Typical response time (Ambient conditions) | 20 ms |
| Mechanical service life (Connection data 2) | approx. 107cycles |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 60 °C |
| Conductor cross section solid (Contact side) | 0.14 mm² ... 1.5 mm² |
| Nominal input voltage UN (Ambient conditions) | 24 V DC |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Conductor cross section AWG (Connection data 1) | 26 ... 14 (solid) |
| Conductor cross section flexible (Contact side) | 0.14 mm² ... 1.5 mm² |
| Flammability rating according to UL 94 (General) | V2 |
| Typical input current at UN (Ambient conditions) | 56 mA |
| Conductor cross section solid (Connection data 1) | 0.14 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. (Coil side) | 240 W (at 24 V DC) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible (Connection data 1) | 0.14 mm² ... 2.5 mm² |
| Input voltage range in reference to UN (Ambient conditions) | see diagram |
| Power dissipation for nominal condition (Ambient conditions) | 1.34 W |
| Test voltage relay contact/relay contact (Connection data 2) | 2.5 kVrms(50 Hz, 1 min.) |
| Test voltage relay winding/relay contact (Connection data 2) | 2.5 kVrms(50 Hz, 1 min.) |
Product Description
Pre-assembled relay module with push-in connection, consisting of: relay socket, relay with power contact and clamping flange. Contact type: 3 investor contacts. Input voltage: 24 V DC
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
RIF-4... relay base, for high-power relay with 2 or 3 PDTs or 3 N/O contacts, Push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
