In Stock Hot Product
RIF-1-RPT-LV-230AC/1X21AU
RIF-1-RPT-LV-230AC/1X21AU 2903335 PHOENIX CONTACT Pre-assembled relay module with push-in connection, consis..
$0.00USD
3429 in stock
Key Specifications
:60 Hz
Note:the following values are applicable if a gold layer is destroyed
Depth:75 mm
Width:16 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 60 Hz | |
| Note | the following values are applicable if a gold layer is destroyed |
| Depth | 75 mm |
| Width | 16 mm |
| Height | 93 mm |
| Coil voltage | 230 V AC |
| Contact type | 1 PDT |
| Type of note | Notes on operation |
| Operating mode | 100% operating factor |
| Connection name | Coil side |
| Mains frequency | 50 Hz |
| Contact material | AgNi, hard gold-plated |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Push-in connection |
| Mounting position | any |
| Protective circuit | Varistor |
| Degree of protection | IP20 (Relay socket) |
| Overvoltage category | III |
| Assembly instructions | In rows with zero spacing |
| Standards/regulations | DIN EN 50178 |
| Typical response time | 3 ms ... 12 ms |
| Maximum inrush current | 50 mA |
| Min. switching current | 1 mA (at 24 V) |
| Mechanical service life | Approx. 107cycles |
| Nominal input voltage UN | 230 V AC |
| Rated insulation voltage | 250 V AC |
| Maximum switching voltage | 30 V AC |
| Minimum switching voltage | 100 mV (at 10 mA) |
| Operating voltage display | Yellow LED |
| Typical release time range | 3 ms ... 20 ms |
| Conductor cross section AWG | 26 ... 16 |
| Limiting continuous current | 50 mA |
| Typical input current at UN | 6 mA |
| Conductor cross section solid | 0.14 mm² ... 1.5 mm² |
| Ambient temperature (operation) | -40 °C ... 50 °C |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Input voltage range in reference to UN | see diagram |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Test voltage relay winding/relay contact | 4 kVrms(50 Hz, 1 min.) |
| Switching capacity in acc. with DIN VDE 0660/IEC 60947 | 2 A (at 24 V, AC15) |
Product Description
Pre-assembled relay module with push-in connection, consisting of: relay socket, relay with multi-layer universal contact, plug-in indication/anti-parasitic module and clamping flange. Contact type: 1
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
