In Stock Hot Product
RIF-1-RPT-LV-120AC/2X21AU
RIF-1-RPT-LV-120AC/2X21AU 2903328 PHOENIX CONTACT Relay Module
$0.00USD
3614 in stock
Key Specifications
GTIN:4046356732321
Orderkey:2903328
(Coil side):36 V DC
Catalog page:Page 341 (C-5-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356732321 |
| Orderkey | 2903328 |
| (Coil side) | 36 V DC |
| Catalog page | Page 341 (C-5-2017) |
| Depth (Note) | 75 mm |
| Packing unit | 10 pc |
| Width (Note) | 16 mm |
| Height (Note) | 93 mm |
| (Contact side) | 2 A (at 250 V, AC15) |
| Country of origin | DE (Germany) |
| Note (Contact side) | the following values are applicable if a gold layer is destroyed |
| (Connection data 1) | 26 ... 16 (flexible) |
| (Connection data 2) | RT III (Relay) |
| Custom tariff number | 85364900 |
| Insulation (General) | Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts. |
| Minimum order quantity | 10 pc |
| Contact type (Coil side) | 2 PDT |
| Note (Connection data 2) | FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) |
| Note (Key Commercial Data) | FBS 2-6... plug-in bridge for the input side (A2) and FBS-2-8... plug-in bridge for the output side (11/21) |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgNi, hard gold-plated |
| Degree of pollution (General) | 2 |
| Rated surge voltage (General) | 6 kV |
| Overvoltage category (General) | III |
| Contact material (Contact side) | AgNi |
| Standards/regulations (General) | DIN EN 50178 |
| Type of note (Connection data 2) | Notes on operation |
| Coil voltage (Ambient conditions) | 120 V AC |
| Switching capacity (Contact side) | 2 A (at 24 V, DC13) |
| Maximum inrush current (Coil side) | 50 mA |
| Min. switching current (Coil side) | 1 mA (at 24 V) |
| Operating mode (Connection data 2) | 100% operating factor |
| Type of note (Key Commercial Data) | Notes on operation |
| Type of switch contact (Coil side) | Single contact |
| Connection name (Connection data 1) | Contact side |
| Mains frequency (Ambient conditions) | 50/60 Hz |
| Net weight (SAP) (Connection data 2) | 68.1 g |
| Stripping length (Connection data 1) | 8 mm |
| Weight per Piece (excluding packing) | 68.100 g |
| Connection method (Connection data 1) | Push-in connection |
| Maximum switching voltage (Coil side) | 30 V AC |
| Min. switching current (Contact side) | 10 mA (At 5 V) |
| Minimum switching voltage (Coil side) | 100 mV (at 10 mA) |
| Mounting position (Connection data 2) | any |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Limiting continuous current (Coil side) | 50 mA |
| Protective circuit (Ambient conditions) | Varistor |
| Degree of protection (Connection data 2) | IP20 (Relay base) |
| Maximum switching voltage (Contact side) | 250 V AC/DC |
| Minimum switching voltage (Contact side) | 5 V (at 10 mA) |
| Test voltage PDT/PDT (Connection data 2) | 2.5 kVrms(50 Hz, 1 min.) |
| Assembly instructions (Connection data 2) | In rows with zero spacing |
| Limiting continuous current (Contact side) | 12 A (20 ms, N/O contact) |
| Typical response time (Ambient conditions) | 3 ms ... 12 ms |
| (Contact side (with destroyed gold layer)) | 26 ... 16 (flexible) |
| Mechanical service life (Connection data 2) | approx. 107cycles |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 50 °C |
| Service life, electrical (Connection data 2) | see diagram |
| Nominal input voltage UN (Ambient conditions) | 120 V AC |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Conductor cross section AWG (Connection data 1) | 26 ... 16 (solid) |
| Typical release time range (Ambient conditions) | 3 ms ... 20 ms |
| Flammability rating according to UL 94 (General) | V2 |
| Typical input current at UN (Ambient conditions) | 8 mA |
| Conductor cross section solid (Connection data 1) | 0.14 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. (Coil side) | 1.2 W (at 24 V DC) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible (Connection data 1) | 0.14 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. (Contact side) | 192 W (at 24 V DC) |
| Connection name (Contact side (with destroyed gold layer)) | Coil side |
| Input voltage range in reference to UN (Ambient conditions) | see diagram |
| Stripping length (Contact side (with destroyed gold layer)) | 8 mm |
| Connection method (Contact side (with destroyed gold layer)) | Push-in connection |
| Power dissipation for nominal condition (Ambient conditions) | 0.96 W |
| Test voltage relay winding/relay contact (Connection data 2) | 4 kVrms(50 Hz, 1 min.) |
| Conductor cross section AWG (Contact side (with destroyed gold layer)) | 26 ... 16 (solid) |
| Conductor cross section solid (Contact side (with destroyed gold layer)) | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible (Contact side (with destroyed gold layer)) | 0.14 mm² ... 1.5 mm² |
Product Description
Pre-assembled relay module with push-in connection, consisting of: relay socket, relay with multi-layer universal contact, plug-in indication/anti-parasitic module and clamping flange. Contact type: 2
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
RIF-1... relay base, for miniature power relay with 1 or 2 PDTs or solid-state relays of the same design, push-in connection, plug-in option for input/suppressor modules, for mounting on NS 35/7,5
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
