In Stock Hot Product
RIF-0-RPT-12DC/ 1AU
RIF-0-RPT-12DC/ 1AU 2903360 PHOENIX CONTACT Relay Module
$0.00USD
4363 in stock
Key Specifications
GTIN:4046356731980
Orderkey:2903360
(Coil side):3 A (230 V (AC 15))
Catalog page:Page 333 (C-5-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356731980 |
| Orderkey | 2903360 |
| (Coil side) | 3 A (230 V (AC 15)) |
| Catalog page | Page 333 (C-5-2017) |
| Depth (Note) | 66 mm |
| Packing unit | 10 pc |
| Width (Note) | 6.2 mm |
| Height (Note) | 93 mm |
| (Contact side) | 3 A (at 230 V, AC15) |
| Country of origin | CZ (Czech Republic) |
| Note (Contact side) | the following values are applicable if a gold layer is destroyed |
| (Connection data 1) | 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) |
| (Connection data 2) | RT III (Relay) |
| Custom tariff number | 85364110 |
| Insulation (General) | safe isolation |
| Minimum order quantity | 10 pc |
| Contact type (Coil side) | 1 N/O contact |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgSnO, hard gold-plated |
| Degree of pollution (General) | 2 |
| Rated surge voltage (General) | 6 kV |
| Overvoltage category (General) | III |
| Switching capacity (Coil side) | 1 A (24 V (DC13)) |
| Contact material (Contact side) | AgSnO |
| Standards/regulations (General) | DIN EN 50178 |
| Coil voltage (Ambient conditions) | 12 V DC |
| Switching capacity (Contact side) | 2 A (at 24 V, DC13) |
| Maximum inrush current (Coil side) | 50 mA |
| Min. switching current (Coil side) | 1 mA (at 12 V) |
| Operating mode (Connection data 2) | 100% operating factor |
| Rated insulation voltage (General) | 250 V AC |
| Type of switch contact (Coil side) | Single contact |
| Connection name (Connection data 1) | Output side |
| Net weight (SAP) (Connection data 2) | 24.9 g |
| Stripping length (Connection data 1) | 8 mm |
| Weight per Piece (excluding packing) | 24.900 g |
| Connection method (Connection data 1) | Push-in connection |
| Maximum switching voltage (Coil side) | 30 V AC |
| Min. switching current (Contact side) | 10 mA (at 12 V) |
| Minimum switching voltage (Coil side) | 100 mV (at 10 mA) |
| Mounting position (Connection data 2) | any |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Limiting continuous current (Coil side) | 50 mA |
| Protective circuit (Ambient conditions) | Damping diode |
| Degree of protection (Connection data 2) | IP20 (Relay base) |
| Maximum switching voltage (Contact side) | 250 V AC/DC |
| Minimum switching voltage (Contact side) | 5 V (at 100 mA) |
| Assembly instructions (Connection data 2) | In rows with zero spacing |
| Typical release time (Ambient conditions) | 8 ms |
| Limiting continuous current (Contact side) | 6 A |
| Typical response time (Ambient conditions) | 5 ms |
| (Contact side (with destroyed gold layer)) | 0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve) |
| Mechanical service life (Connection data 2) | approx. 2x 107cycles |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 60 °C |
| Service life, electrical (Connection data 2) | see diagram |
| Nominal input voltage UN (Ambient conditions) | 12 V DC |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Conductor cross section AWG (Connection data 1) | 24 ... 16 |
| Flammability rating according to UL 94 (General) | V2 |
| Typical input current at UN (Ambient conditions) | 16 mA |
| Conductor cross section solid (Connection data 1) | 0.14 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. (Coil side) | 1.2 W (at 24 V DC) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible (Connection data 1) | 0.14 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. (Contact side) | 140 W (at 24 V DC) |
| Connection name (Contact side (with destroyed gold layer)) | Input side |
| Input voltage range in reference to UN (Ambient conditions) | see diagram |
| Stripping length (Contact side (with destroyed gold layer)) | 8 mm |
| Connection method (Contact side (with destroyed gold layer)) | Push-in connection |
| Power dissipation for nominal condition (Ambient conditions) | 0.19 W |
| Test voltage relay winding/relay contact (Connection data 2) | 4 kVrms(50 Hz, 1 min.) |
| Conductor cross section AWG (Contact side (with destroyed gold layer)) | 24 ... 16 |
| Conductor cross section solid (Contact side (with destroyed gold layer)) | 0.14 mm² ... 1.5 mm² |
| Conductor cross section flexible (Contact side (with destroyed gold layer)) | 0.14 mm² ... 1.5 mm² |
Product Description
Pre-assembled relay module with push-in connection, consisting of: relay socket with ejector and multi-layer gold contact relay. Contact type: 1 normally open contact. Input voltage: 12 V DC
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 12 V DC
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
