

| Parameter | Value |
|---|---|
| 36 V DC | |
| Note | the following values are applicable if a gold layer is destroyed |
| Color | white (RAL 9010) |
| Depth | 15 mm |
| Width | 5 mm |
| Height | 28 mm |
| Product type | Single relay |
| Assembly note | in rows with zero spacing |
| Identification | ISA-S71.04. G3 Harsh Group |
| Operating mode | 100% operating factor |
| Coil resistance | 119 Ω ±10 % (at 20 °C) |
| Article revision | 02 |
| Contact material | AgSnO, hard gold-plated |
| Drive (polarity) | non-polarized |
| Pollution degree | 3 |
| Connection method | Plug / solder connection |
| Mounting position | any |
| Drive and function | monostable |
| Switching capacity | 2 A (at 24 V, DC13) |
| Dimensional drawing | |
| Input voltage range | 2.7 V DC ... 12.4 V DC |
| Overvoltage category | III |
| Typical release time | 2.5 ms |
| Standards/regulations | IEC 60664 |
| Typical response time | 5 ms |
| Contact switching type | 1 changeover contact |
| Maximum inrush current | on request |
| Min. switching current | 1 mA (at 24 V) |
| Type of switch contact | Single contact |
| Mechanical service life | 2x 107cycles |
| Nominal input voltage UN | 4.5 V DC |
| Maximum switching voltage | 30 V AC |
| Minimum switching voltage | 100 mV (at 10 mA) |
| Limiting continuous current | 50 mA |
| Typical input current at UN | 38 mA |
| Date of last data management | 02.05.2024 |
| Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -40 °C ... 85 °C |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum power dissipation for nominal condition | 0.17 W |
Technical specifications and performance data
Installation and operation guide