In Stock Hot Product
REL-IR4/L-230AC/4X21AU
REL-IR4/L-230AC/4X21AU 2903685 PHOENIX CONTACT Single relay
$0.00USD
4588 in stock
Key Specifications
GTIN:4046356758987
Orderkey:2903685
(General):IEC 61810
(Coil side):36 V DC
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356758987 |
| Orderkey | 2903685 |
| (General) | IEC 61810 |
| (Coil side) | 36 V DC |
| Catalog page | Page 314 (C-5-2017) |
| Packing unit | 10 pc |
| (Contact side) | 1 A (at 240 V, AC15) |
| Note (Coil side) | If the specified maximum values for multi-layer contact relays are exceeded, the gold plating is destroyed. The maximum values of the power contact relay are then valid. This can result in a shorter service life than with a pure power contact. |
| Country of origin | PL (Poland) |
| Note (Contact side) | the following values are applicable if a gold layer is destroyed |
| Custom tariff number | 85364900 |
| Insulation (General) | Basic insulation |
| Minimum order quantity | 10 pc |
| Contact type (Coil side) | 4 PDTs |
| Depth (Key Commercial Data) | 35.6 mm |
| Width (Key Commercial Data) | 21.2 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgNi, hard gold-plated |
| Height (Key Commercial Data) | 27.5 mm |
| Degree of pollution (General) | 2 |
| Rated surge voltage (General) | 2.5 kV |
| Overvoltage category (General) | II |
| Contact material (Contact side) | AgNi |
| Standards/regulations (General) | IEC 60664 |
| Switching capacity (Contact side) | 2 A (at 24 V, DC13) |
| Maximum inrush current (Coil side) | 50 mA |
| Min. switching current (Coil side) | 2 mA (24 V DC) |
| Rated insulation voltage (General) | 250 V AC |
| Type of switch contact (Coil side) | Single contact |
| Status display (Ambient conditions) | Yellow LED |
| Switching capacity min. (Coil side) | 48 mW |
| Mains frequency (Ambient conditions) | 50/60 Hz |
| Weight per Piece (excluding packing) | 32.420 g |
| Maximum inrush current (Contact side) | 16 A (20 ms, N/O contact) |
| Maximum switching voltage (Coil side) | 30 V AC |
| Min. switching current (Contact side) | 5 mA (at 24 V) |
| Minimum switching voltage (Coil side) | 2 V (At 24 mA) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Limiting continuous current (Coil side) | 50 mA |
| Maximum switching voltage (Contact side) | 250 V AC/DC |
| Minimum switching voltage (Contact side) | 5 V (At 24 mA) |
| Connection in acc. with standard (General) | CSA |
| Limiting continuous current (Contact side) | 6 A |
| Typical response time (Ambient conditions) | 5 ms ... 15 ms (depending on phase relation) |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 55 °C |
| Nominal input voltage UN (Ambient conditions) | 230 V AC |
| Typical release time range (Ambient conditions) | 5 ms ... 20 ms (depending on phase relation) |
| Typical input current at UN (Ambient conditions) | 6.5 mA |
| Interrupting rating (ohmic load) max. (Coil side) | 1.2 W (at 24 V DC) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Interrupting rating (ohmic load) max. (Contact side) | 144 W (at 24 V DC) |
| Operating mode (Contact side (with destroyed gold layer)) | 100% operating factor |
| Input voltage range in reference to UN (Ambient conditions) | see diagram |
| Net weight (SAP) (Contact side (with destroyed gold layer)) | 32.42 g |
| Mounting position (Contact side (with destroyed gold layer)) | any |
| Power dissipation for nominal condition (Ambient conditions) | 1.5 W |
| Degree of protection (Contact side (with destroyed gold layer)) | RT I |
| Test voltage PDT/PDT (Contact side (with destroyed gold layer)) | 2 kVrms(50 Hz, 1 min.) |
| Mechanical service life (Contact side (with destroyed gold layer)) | approx. 2x 107cycles |
| Service life, electrical (Contact side (with destroyed gold layer)) | see diagram |
| Test voltage relay winding/relay contact (Contact side (with destroyed gold layer)) | 2.5 kVrms(50 Hz, 1 min.) |
Product Description
Pluggable industrial relays with power contacts and additional hard gold, 4 switched contacts, test key, status LED, switching position indication, coil voltage: 230 V AC
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
