In Stock Hot Product
REL-FO/LD-110DC/1X21/MS
REL-FO/LD-110DC/1X21/MS 1308300 PHOENIX CONTACT Plug-in miniature relay with mechanical switching position i..
$4.16USD
2449 in stock
Key Specifications
:360 W (30 V DC)
Depth:35 mm
Width:13 mm
Height:31.1 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 360 W (30 V DC) | |
| Depth | 35 mm |
| Width | 13 mm |
| Height | 31.1 mm |
| General | Do not use to separate SELV/PELV circuits from other circuits, because safe isolation is not guaranteed. (applies to the optocoupler variants) |
| Altitude | ≤ 2000 m |
| Insulation | Basic insulation |
| Relay type | Electromechanical relay |
| Product type | Single relay |
| Operating mode | 100% operating factor |
| Product family | ESSENTIAL edition |
| Status display | Yellow LED |
| Coil resistance | 18870 Ω ±10 % |
| Test voltage () | 1 kVrms(50 Hz, 1 min., open contact) |
| Contact material | AgSnO |
| Drive (polarity) | polarized |
| Pollution degree | 3 |
| Connection method | FASTON connection |
| Cross section AWG | (converted acc. to IEC) |
| Mounting position | any |
| Drive and function | monostable |
| Protective circuit | Freewheeling diode |
| Input voltage range | 77 V DC ... 121 V DC |
| Rated surge voltage | 2.5 kV |
| Overvoltage category | II |
| Typical release time | 10 ms |
| Standards/regulations | IEC 61810-1 |
| Typical response time | 9 ms |
| Contact switching type | 1 changeover contact |
| Maximum inrush current | 24 A (20 ms, N/O contacts) |
| Type of switch contact | Single contact |
| Inrush current, minimum | 100 mA (5 V) |
| Mechanical service life | approx. 5x 107cycles |
| Nominal input voltage UN | 110 V DC |
| Rated insulation voltage | 250 V AC |
| Maximum switching voltage | 250 V AC/DC |
| Minimum switching voltage | 5 V (100 mA) |
| Limiting continuous current | 12 A |
| Typical input current at UN | 6 mA |
| Degree of protection (Relay) | RT II (Relay) |
| Input power dissipation for UN | 0.66 W |
| Test voltage (Winding/contact) | 5 kVrms(50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Interrupting rating (ohmic load) max. | 288 W (24 V DC) |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Degree of protection (Installation location) | IP54 (Installation location) |
| Maximum power dissipation for nominal condition | 0.73 W |
Product Description
Plug-in miniature relay with mechanical switching position indicator, FASTON connection, 1 changeover contact, status display: Yellow LED, Freewheeling diode, Input voltage: 110 V DC
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
