


| Parameter | Value |
|---|---|
| Fan | Yes |
| Name | CPR-1600-48 |
| State | Recommended Model |
| Alarms | Over Temperature, mains Failure, Output OK |
| Format | 19"Rack |
| Series | CPR-1600 |
| Approvals | CE, UL |
| Interface | I2C, PMBus |
| Power (W) | 1.608,00 |
| Subformato | 1U |
| Width (mm) | 85.00 |
| Height (mm) | 41.00 |
| AC input Max | 264,00 |
| AC input Min | 90,00 |
| Applications | Industrial, Telecommunications |
| Manufacturer | MEAN WELL |
| Product type | Power supply AC/DC |
| Isolation (V) | 3.000,00 |
| Output voltage | 48,00 |
| Peak Power (W) | One thousand six hundred eight |
| Input connector | Pin |
| Input frequency | 50 Hz, 60 Hz |
| Long/Background | 41.00 |
| Long Description | Power supply for 19" Rack programmable via ITwoC and PMBus.FormatRack 19".Range of universal input90-264vac.47-63Hz.Output voltage48vdc.Adjustable by potentiometer (47,5-58,8 Vdc) or by external resistance from 40% to 125%or configurable by protocol ITwoC.Output intensity33,5. Range of output current 0-33,5 according To the demand load.Power:1608W.Efficiency typical:93%.Paralelizable up to 3 units with sharing of active current and diode mosfet protection in the Rack RHP-1U.Hot Swapt. Change in hot.Factor corrector, power>0,97to 230vac at full load.Remote on / off.Auxiliary output and 5V 0.3 A.3-color LED charging status indicator.Working temperature: from-30up+70 ° Cof ambient temperature. Consult the technical data sheet to see the curves of drift.Dimensions (Length x Width x Height) [mm]:300 x 85 x 41.5 years of warranty.Manufacturer: MEAN WELL.The power supplies of the series PCR are designed to install in the Rack RHP-1U supports up to 3 sources RCP-1600. These sources allow you to configure the output current through RTwoC and PMBus, and optionally via CANBus. Can be connected in parallel up to 3 sources protected by a diode Mosfet for the protection of the current investment. They have a wide range of temperature from -30ºC up to +70ºC. The tension can also be adjusted via a potentiometer. Have a high efficiency and auxiliary output of 5V. The function Hot-Swap or hot-swap allows us to replace any damaged equipment without having to stop the system, or to increase the power at any time. |
| Output connector | Screw-Type |
| Type of Entry CA | Single-phase |
| Warranty (Years) | 5,00 |
| Country of Origin | Taiwan |
Technical specifications and performance data
Installation and operation guide