

| Parameter | Value |
|---|---|
| Note | Connection bolts |
| Color | gray |
| Width | 87 mm |
| Length | 136 mm |
| Screw thread | M8 |
| Bolt diameter | 8 mm |
| Hole diameter | 8.4 mm |
| Height NS 35/15 | 74.5 mm |
| Open side panel | nein |
| Height NS 35/7,5 | 67 mm |
| Number of levels | 1 |
| Pollution degree | 3 |
| Connection method | Bolt connection |
| Nominal current IN | 192 A |
| Nominal voltage UN | 1000 V |
| Insulating material | PA |
| Number of positions | 3 |
| Rated surge voltage | 8 kV |
| Maximum load current | 192 A (in case of a 70 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) |
| Overvoltage category | III |
| Nominal cross section | 70 mm² |
| Number of connections | 6 |
| Tightening torque max | 12 Nm |
| Tightening torque, min | 6 Nm |
| Insulating material group | I |
| Conductor cross section AWG max. | 2/0 |
| Conductor cross section AWG min. | 8 |
| Connection in acc. with standard | IEC 60947-7-1 |
| Conductor cross section solid max. | 70 mm² |
| Conductor cross section solid min. | 6 mm² |
| Conductor cross section flexible max. | 70 mm² |
| Conductor cross section flexible min. | 6 mm² |
| Flammability rating according to UL 94 | V0 |
| Cable lug connection according to standard | DIN 46 234 |
| Max. AWG conductor cross section, flexible | 2/0 |
| Min. AWG conductor cross section, flexible | 8 |
| Max. cross section for cable lug connection | 70 mm² |
| Min. cross section for cable lug connection | 2.5 mm² |
Technical specifications and performance data
Installation and operation guide