

| Parameter | Value |
|---|---|
| GTIN | 4055626369853 |
| Orderkey | 2702863 |
| (Supply) | -93 dBm (250 kbps) |
| (General) | ≤ 6 A (at 24 V DC, with DIN rail connector at full capacity) |
| Catalog page | Page 457 (C-6-2017) |
| Depth (Note) | 114.5 mm |
| Packing unit | 1 pc |
| Width (Note) | 17.5 mm |
| (Dimensions) | -40 °F ... 185 °F |
| Height (Note) | 116 mm |
| (RSSI output) | 60 V DC |
| Range (Supply) | ± 5 km (The range may be considerably above or below that stated, and depends on the environment, antenna technology, and the product used) |
| Country of origin | DE (Germany) |
| Security (Supply) | 128-bit data encryption |
| (Connection data) | Green LED (transmit data, TX) |
| Data rate (Supply) | 16 kbps (adjustable) |
| Direction (Supply) | Bi-directional |
| Frequency (Supply) | 2400 MHz |
| Shock (Dimensions) | 16g, 11 ms |
| (Serial interface) | ≤ 99 (Addressing via thumbwheel) |
| Custom tariff number | 85176200 |
| (Ambient conditions) | 142 Years (Telcordia standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
| (Wireless interface) | 187.5 kbps |
| Altitude (Dimensions) | 2000 m |
| Frequency range (Supply) | 2.4002 GHz ... 2.4785 GHz |
| Shock (Status indicator) | 16g, 11 ms |
| Channel distance (Supply) | 1.3 MHz |
| MTTF (Ambient conditions) | 778 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| Contact type (RSSI output) | PDT |
| Dimensional drawing (Note) | |
| Antenna connection (Supply) | RSMA (female) |
| Security (Status indicator) | 128-bit data encryption |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| MIC rating (Status indicator) | Japan MIC (RF) ID:202-LSE100 |
| Receiver sensitivity (Supply) | -106 dBm (16 kbps) |
| Contact material (RSSI output) | PdRu, gold-plated |
| Designation (Serial interface) | Wireless network |
| Supply voltage range (General) | 19.2 V DC ... 30.5 V DC |
| Number of outputs (RSSI output) | 1 |
| I/O data mode (Serial interface) | ≤ 99 (I/O extension modules per wireless network, serial interfaces deactivated) |
| Interface 1 (Wireless interface) | RS-232 |
| Interface 2 (Wireless interface) | RS-485 |
| Interface 3 (Wireless interface) | Configuration interface |
| Status display (Connection data) | Green LED (supply voltage, PWR) |
| Degree of protection (Dimensions) | IP20 |
| Number of channel groups (Supply) | 8 |
| Number of outputs (System limits) | 1 |
| Max. current consumption (General) | ≤ 65 mA (at 24 V DC, at 25 °C, stand-alone) |
| Vibration (operation) (Dimensions) | in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz |
| Channel distance (Status indicator) | 1.3 MHz |
| Noxious gas test (Status indicator) | ISA-S71.04-1985 G3 Harsh Group A |
| Operating mode (Ambient conditions) | I/O data (Default setting, configuration via thumbwheel) |
| Screw thread (RF link relay output) | M3 |
| Serial data mode (Serial interface) | 0 (no I/O extension modules can be used) |
| Transmit capacity, maximum (Supply) | ≤ 20 dBm |
| Transmit capacity, minimum (Supply) | 0 dBm |
| Max. switching current (RSSI output) | 500 mA (30 V AC/DC) |
| Transient surge protection (General) | Yes |
| Weight per Piece (excluding packing) | 197.500 g |
| Electrical service life (RSSI output) | 5x 105switching cycles with 0.5 A at 30 V DC |
| Housing material (Ambient conditions) | PA 6.6-FR |
| Number of channels per group (Supply) | 55 |
| Voltage output signal (System limits) | 0 V ... 3 V |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Connection method (Wireless interface) | S-PORT (socket) |
| PLC/Modbus RTU mode (Serial interface) | ≤ 99 (I/O extension modules per wireless network, access to extension modules via Modbus RTU protocol) |
| Maximum switching voltage (RSSI output) | 30 V AC/DC |
| Stripping length (RF link relay output) | 7 mm |
| Trade restriction (Key Commercial Data) | The products are offered exclusively for export outside the EU and the European Economic Area. |
| Transmission speed (Wireless interface) | 300 bps |
| Connection method (RF link relay output) | Screw connection |
| Degree of pollution (Ambient conditions) | 2 |
| Interface description (Status indicator) | Trusted Wireless |
| Tightening torque (RF link relay output) | 0.6 Nm |
| Transmission length (Wireless interface) | ≤ 1200 m |
| Vibration (operation) (Status indicator) | in accordance with IEC 60068-2-6: 5g, 10 Hz ... 150 Hz |
| Overvoltage category (Ambient conditions) | II |
| Termination resistor (Wireless interface) | 390 Ω (switchable via DIP switches) |
| Assembly instructions (Ambient conditions) | on standard DIN rail NS 35 in accordance with EN 60715 |
| Connection technology (Wireless interface) | 2-wire |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 70 °C (>55°C derating) |
| Permissible humidity (operation) (Dimensions) | 20 % ... 85 % |
| Number of supported devices (Serial interface) | ≤ 250 (Addressing via PSI-CONF software) |
| Electromagnetic compatibility (Status indicator) | Conformance with RED Directive 2014/53/EU |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Permissible humidity (storage/transport) (Dimensions) | 20 % ... 85 % |
| Conductor cross section AWG max. (RF link relay output) | 14 |
| Conductor cross section AWG min. (RF link relay output) | 24 |
| Number of possible extension modules (Serial interface) | ≤ 32 (per wireless module) |
| Conductor cross section solid max. (RF link relay output) | 2.5 mm² |
| Conductor cross section solid min. (RF link relay output) | 0.2 mm² |
| Flammability rating according to UL 94 (Status indicator) | V0 |
| Flammability rating according to UL 94 (Ambient conditions) | V0 |
| Conductor cross section flexible max. (RF link relay output) | 2.5 mm² |
| Conductor cross section flexible min. (RF link relay output) | 0.2 mm² |
Technical specifications and performance data
Installation and operation guide