In Stock Hot Product
QUINT4-PS/1AC/48DC/5
QUINT4-PS/1AC/48DC/5 2904610 PHOENIX CONTACT Power supply unit
$0.00USD
3020 in stock
Key Specifications
GTIN:4055626355061
Orderkey:2904610
Packing unit:1 pc
(Input data):< 16 W (230 V AC)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626355061 |
| Orderkey | 2904610 |
| Packing unit | 1 pc |
| (Input data) | < 16 W (230 V AC) |
| (Output data) | > 374000 h (60 °C) |
| Country of origin | TH (Thailand) |
| Custom tariff number | 85044030 |
| (Ambient conditions) | typ. 43 ms (230 V AC) |
| Derating (Input data) | > 60 °C (2.5%/K) |
| Efficiency (Output data) | typ. 92.3 % (120 V AC) |
| Net weight (Output data) | 1 kg |
| Output power (Input data) | 240 W |
| Stripping length (General) | 6.5 mm |
| Climatic class (Dimensions) | 3K3 (in acc. with EN 60721) |
| Connection method (General) | Screw connection |
| Depth (Key Commercial Data) | 125 mm |
| Width (Key Commercial Data) | 50 mm |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Height (Key Commercial Data) | 130 mm |
| Residual ripple (Input data) | < 80 mVPP(with nominal values) |
| Control deviation (Input data) | < 0.5 % (Static load change 10 % ... 90 %) |
| Protection class (Output data) | I |
| Input fuse (Ambient conditions) | 8 A (slow-blow, internal) |
| Mounting position (Output data) | horizontal DIN rail NS 35, EN 60715 |
| (Connection data for signaling) | UL ANSI/ISA-12.12.01 Class I, Division 2, Groups A, B, C, D (Hazardous Location) |
| Degree of pollution (Dimensions) | 2 |
| Feedback resistance (Input data) | ≤ 60 V DC |
| Installation height (Dimensions) | ≤ 5000 m (> 2000 m, observe derating) |
| Connection in series (Input data) | yes |
| Degree of protection (Dimensions) | IP20 |
| Degree of protection (Output data) | IP20 |
| Typical response time (Input data) | 300 ms (from SLEEP MODE) |
| Assembly instructions (Output data) | alignable: PN≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN<50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
| Connection in parallel (Input data) | Yes, for redundancy and increased capacity |
| Nominal output voltage (Input data) | 48 V DC |
| Mains buffering (Ambient conditions) | typ. 43 ms (120 V AC) |
| Weight per Piece (excluding packing) | 1,117.800 g |
| Shock (Connection data for signaling) | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 25; |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| AC frequency range (Ambient conditions) | 50 Hz ... 60 Hz -10 % ... +10 % |
| Dynamic Boost (IDyn.Boost) (Input data) | 10 A (5 s) |
| Static Boost (IStat.Boost) (Input data) | 6.25 A |
| Type of protection (Ambient conditions) | Transient surge protection |
| Current consumption (Ambient conditions) | 3.4 A (100 V AC) |
| Input voltage range (Ambient conditions) | 100 V AC ... 240 V AC -15 % ... +10 % |
| MTBF (IEC 61709, SN 29500) (Output data) | > 1242000 h (25 °C) |
| Nominal output current (IN) (Input data) | 5 A |
| Inrush surge current (Ambient conditions) | typ. 16.1 A (at 25 °C) |
| Power loss nominal load max. (Input data) | < 19 W (120 V AC) |
| Stripping length (Connection data, input) | 6.5 mm |
| Conductor cross section AWG max. (General) | 14 |
| Conductor cross section AWG min. (General) | 24 |
| Connection method (Connection data, input) | Screw connection |
| Stripping length (Connection data, output) | 8 mm |
| Connection method (Connection data, output) | Push-in connection |
| Insulation voltage input / PE (Output data) | 3.5 kV AC (type test) |
| Selective Fuse Breaking (ISFB) (Input data) | 30 A (15 ms) |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 70 °C (> 60 °C Derating: 2.5 %/K) |
| Conductor cross section solid max. (General) | 2.5 mm² |
| Conductor cross section solid min. (General) | 0.2 mm² |
| Discharge current to PE (Ambient conditions) | < 3.5 mA |
| Insulation voltage output / PE (Output data) | 0.5 kV DC (type test) |
| UL approvals (Connection data for signaling) | UL Listed UL 508 |
| Insulation voltage input/output (Output data) | 4 kV AC (type test) |
| Nominal power consumption (Ambient conditions) | 271 VA |
| Conductor cross section flexible max. (General) | 2.5 mm² |
| Conductor cross section flexible min. (General) | 0.2 mm² |
| Dielectric strength maximum (Ambient conditions) | 300 V AC 60 s |
| Nominal input voltage range (Ambient conditions) | 100 V AC ... 240 V AC |
| Protective circuit/component (Ambient conditions) | Varistor, gas-filled surge arrester |
| Rail applications (Connection data for signaling) | EN 50121-3-2 |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Depth with alternative assembly (Key Commercial Data) | 53 mm |
| Shipbuilding approval (Connection data for signaling) | DNV GL, PRS, BV, LR, ABS |
| Vibration (operation) (Connection data for signaling) | 5 Hz ... 100 Hz resonance search 2.3g, 90 min., resonance frequency 2.3g, 90 min. (according to DNV GL Class C) |
| Width with alternative assembly (Key Commercial Data) | 122 mm |
| Height with alternative assembly (Key Commercial Data) | 130 mm |
| Ambient temperature (start-up type tested) (Dimensions) | -40 °C |
| Setting range of the output voltage (USet) (Input data) | 48 V DC ... 56 V DC (constant capacity) |
| Choice of suitable circuit breakers (Ambient conditions) | 10 A ... 16 A (Characteristic B, C, D, K or comparable) |
| Conductor cross section AWG max. (Connection data, input) | 14 |
| Conductor cross section AWG min. (Connection data, input) | 24 |
| Standard - Safe isolation (Connection data for signaling) | DIN VDE 0100-410 |
| Conductor cross section AWG max. (Connection data, output) | 16 |
| Conductor cross section AWG min. (Connection data, output) | 24 |
| Conductor cross section solid max. (Connection data, input) | 2.5 mm² |
| Conductor cross section solid min. (Connection data, input) | 0.2 mm² |
| Max. permissible relative humidity (operation) (Dimensions) | ≤ 95 % (at 25 °C, non-condensing) |
| Maximum power dissipation in no-load condition (Input data) | < 3 W (120 V AC) |
| Conductor cross section solid max. (Connection data, output) | 1.5 mm² |
| Conductor cross section solid min. (Connection data, output) | 0.2 mm² |
| Standard - Electrical safety (Connection data for signaling) | IEC 60950-1/VDE 0805 (SELV) |
| Electromagnetic compatibility (Connection data for signaling) | Conformance with EMC Directive 2014/30/EU |
| Conductor cross section flexible max. (Connection data, input) | 2.5 mm² |
| Conductor cross section flexible min. (Connection data, input) | 0.2 mm² |
| Conductor cross section flexible max. (Connection data, output) | 1.5 mm² |
| Conductor cross section flexible min. (Connection data, output) | 0.2 mm² |
| Overvoltage category (EN 60950-1) (Connection data for signaling) | II (≤ 5000 m) |
| Overvoltage category (EN 61010-1) (Connection data for signaling) | II (≤ 5000 m) |
| Overvoltage category (EN 62477-1) (Connection data for signaling) | III (≤ 2000 m) |
| Standard - Safety of transformers (Connection data for signaling) | EN 61558-2-16 (air clearances and creepage distances only) |
| Standard – Safety extra-low voltage (Connection data for signaling) | IEC 60950-1 (SELV) |
| Standard – Limitation of mains harmonic currents (Connection data for signaling) | EN 61000-3-2 |
| Approval - requirement of the semiconductor industry with regard to mains voltage dips (Connection data for signaling) | SEMI F47-0706; EN 61000-4-11 |
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations (Connection data for signaling) | EN 50178/VDE 0160 (PELV) |
Product Description
QUINT POWER switched primary-switched power supply for rail mounting, with optional output characteristic curve and SFB (Selective Fuse Breaking) technology, input: single-phase, output: 48VDC/5A
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
