In Stock Hot Product
QUINT-PS/24DC/48DC/ 5
QUINT-PS/24DC/48DC/ 5 2320128 PHOENIX CONTACT DC/DC converters
$0.00USD
4641 in stock
Key Specifications
:14 V DC ... 18 V DC (Consider derating during operation)
Color:green
Depth:125 mm
I/O/S:asymmetrical
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 14 V DC ... 18 V DC (Consider derating during operation) | |
| Color | green |
| Depth | 125 mm |
| I/O/S | asymmetrical |
| Input | 2 kV (Test Level 3 - asymmetrical) |
| Shock | 18 ms, 30g, in each space direction (according to IEC 60068-2-27) |
| Width | 48 mm |
| Height | 130 mm |
| Output | 2 kV (Test Level 3 - asymmetrical) |
| Signal | 2 kV (Test Level 4 - asymmetrical) |
| Voltage | 10 V (Test Level 3) |
| Comments | Criterion A |
| Derating | 60 °C ... 70 °C (2.5 %/K) |
| Rise time | < 2 ms (UOUT(10 % ... 90 %)) |
| Efficiency | > 92.5 % |
| Input fuse | 25 A (internal (device protection)) |
| Criterion A | Normal operating behavior within the specified limits. |
| Criterion B | Temporary impairment to operational behavior that is corrected by the device itself. |
| Hood version | Galvanized sheet steel, free from chrome (VI) |
| Output power | 240 W |
| Screw thread | M3 |
| UL approvals | UL/C-UL listed UL 508 |
| Assembly note | alignable: PN≥50%, 5 mm horizontally, 15 mm next to active components, 50 mm verticallyalignable: PN<50%, 0 mm horizontally, 40 mm vertically top, 20 mm vertically bottom |
| Mounting type | DIN rail mounting |
| Climatic class | 3K3 (in acc. with EN 60721) |
| Inrush current | < 15 A (typical) |
| Output voltage | ≤ 30 V AC/DC |
| Status display | "DC OK" LED green |
| Frequency range | 80 MHz ... 1 GHz |
| Residual ripple | < 20 mVPP |
| Type of housing | Aluminum (AlMg3) |
| Article revision | 05 |
| Discharge in air | 15 kV (Test Level 4) |
| Housing material | Metal |
| Number of phases | 1.00 |
| Protection class | III |
| Stripping length | 8 mm |
| Wide-range input | no |
| Connection method | Pluggable screw connection |
| Contact discharge | 8 kV (Test Level 4) |
| Control deviation | < 1 % (change in load, static 10 % ... 90 %) |
| Mounting position | horizontal DIN rail NS 35, EN 60715 |
| Rail applications | EN 50121-4 |
| Output description | UOUT> 0.9 x UN: High signal |
| Protective circuit | Transient surge protection; Varistor |
| Types of signaling | LED |
| Current consumption | 14 A (24 V, IBOOST) |
| Degree of pollution | 2 |
| Input voltage range | 18 V DC ... 32 V DC |
| Short-circuit-proof | yes |
| Test field strength | 10 V/m |
| Connection in series | yes |
| Degree of protection | IP20 |
| Mains buffering time | > 12 ms (24 V DC) |
| Max. capacitive load | unlimited |
| POWER BOOST (IBoost) | 6.25 A (-25 °C ... 40 °C permanent, UOUT= 48 V DC ) |
| Standard designation | Fire protection in rail vehicles |
| Output characteristic | U/I |
| Shipbuilding approval | DNV GL (EMC B) |
| Standards/regulations | EN 61000-4-2 |
| Tightening torque max | 0.6 Nm |
| Vibration (operation) | < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) |
| Connection in parallel | yes, for redundancy and increased capacity |
| Input voltage range DC | 18 V DC ... 32 V DC |
| Maximum inrush current | < 20 mA (short-circuit-proof) |
| Nominal output voltage | 48 V DC ±1 % |
| Note on status display | LED on |
| Tightening torque, min | 0.5 Nm |
| Switching voltage range | 24 V DC |
| With protective coating | no |
| Standards/specifications | EN 45545-2 (HL3) |
| Active current limitation | Approximately 7 A |
| Standard - Safe isolation | DIN VDE 0100-410 |
| MTBF (IEC 61709, SN 29500) | > 761000 h (40 °C) |
| Feedback voltage resistance | 60 V DC |
| Nominal input voltage range | 24 V DC |
| Nominal output current (IN) | 5 A (-25 °C ... 60 °C) |
| Reverse polarity protection | ≤ yes30 V DC |
| Power loss nominal load max. | 21 W |
| Standard - Electrical safety | EN 60950-1/VDE 0805 (SELV) |
| Electromagnetic compatibility | Conformance with EMC Directive 2014/30/EU |
| Inrush current integral (I2t) | 3 A2s |
| Selective Fuse Breaking (ISFB) | 30 A (12 ms) |
| Voltage type of supply voltage | DC |
| Ambient temperature (operation) | -25 °C ... 70 °C (> 60 °C derating, 2.5 %/K, startup at -40°C type-tested) |
| Insulation voltage input/output | 1.5 kV (type test) |
| Conductor cross section AWG max. | 12 |
| Conductor cross section AWG min. | 24 |
| Installation distance right/left | 0 mm / 0 mm (≤ 70 °C) |
| Installation distance top/bottom | 50 mm / 50 mm (≤ 70 °C) |
| Magnetic circuit breaker tripping | B2 / B4 / C2 |
| Maximum no-load power dissipation | 5.2 W |
| Conductor cross section, rigid max. | 2.5 mm² |
| Conductor cross section, rigid min. | 0.2 mm² |
| EMC requirements for noise emission | EN 61000-6-3 |
| EMC requirements for noise immunity | EN 61000-6-1 |
| Peak switching voltages nominal load | < 10 mVPP(20 MHz) |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section flexible min. | 0.2 mm² |
| Standard – Safety extra-low voltage | EN 60950-1 (SELV) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Extended input voltage range in operation | 14 V DC ... 18 V DC (Derating) |
| Installation distance right/left (active) | 15 mm / 15 mm (≤ 70 °C) |
| Installation distance top/bottom (active) | 50 mm / 50 mm (≤ 70 °C) |
| Ambient temperature (start-up type tested) | -40 °C |
| Setting range of the output voltage (USet) | 30 V DC ... 56 V DC (> 48 V DC, constant capacity restricted) |
| Max. permissible relative humidity (operation) | ≤ 95 % (at 25 °C, non-condensing) |
| Emitted radio interference in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Radio interference voltage in acc. with EN 55011 | EN 55011 (EN 55022) Class B, area of application: Industry and residential |
| Protection against overvoltage at the output (OVP) | < 60 V DC |
| Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations | EN 50178/VDE 0160 (PELV) |
Product Description
Primary switched QUINT DC/DC transformer for rail mounting with SFB (Selective Fuse Breaking) technology, input: 24 V DC, output: 48 V DC/5 A
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
