

| Parameter | Value |
|---|---|
| GTIN | 4046356142267 |
| Note | Made to Order (non-returnable) |
| (Cabel) | IP67 |
| Orderkey | 1584208 |
| Packing unit | 10 pc |
| Country of origin | PL (Poland) |
| Custom tariff number | 85369010 |
| (Key Commercial Data) | Single litz wires 15 cm long; 1.5 mm² |
| Color (Key Commercial Data) | green |
| Degree of protection (Cabel) | IP65 |
| Connection (Key Commercial Data) | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| External cable diameter (General) | 6 mm ... 12 mm |
| Rated current (Ambient conditions) | 17.5 A |
| Wire insulation material (General) | PVC / PE |
| Weight per Piece (excluding packing) | 44.790 g |
| Length of cable (Key Commercial Data) | 0.15 m |
| Ambient temperature (operation) (Cabel) | -25 °C ... 80 °C (specifications of the cable manufacturer must also be observed) |
| Connection method (Key Commercial Data) | QUICKON connection |
| Nominal current IN (Ambient conditions) | 17.5 A |
| Number of positions (Key Commercial Data) | 4 |
| Rated voltage (III/3) (Ambient conditions) | 250 V |
| Number of connections (Key Commercial Data) | 4 |
| Impact category (Electrical characteristics) | 3 |
| Temperature when conductor connected (Cabel) | -5 °C ... 50 °C (specifications of the cable manufacturer must also be observed) |
| Wire diameter including insulation (General) | 1.8 mm ... 3 mm |
| Wrench size, union nut (Key Commercial Data) | 27 mm |
| Contact material (Mechanical characteristics) | Copper alloy |
| Degree of pollution (Mechanical characteristics) | 3 |
| Overvoltage category (Mechanical characteristics) | III |
| Tightening torque, union nut (Key Commercial Data) | 3 Nm |
| Wrench size, contact carrier (Key Commercial Data) | 30 mm |
| PC QUICKON thread type (Electrical characteristics) | M25 |
| QUICKON connectability (Electrical characteristics) | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| Tightening torque, counter nut (Key Commercial Data) | 5 Nm |
| Contact carrier material (Mechanical characteristics) | PA |
| Contact surface material (Mechanical characteristics) | Pre-nickel plated and tin-plated |
| Conductor cross section AWG max. (Key Commercial Data) | 16 |
| Conductor cross section AWG min. (Key Commercial Data) | 18 |
| Flammability rating according to UL 94 (Material data) | V0 |
| Note on the rated voltage (III/3) (Ambient conditions) | with insulating sleeve |
| Tightening torque contact carrier (Key Commercial Data) | 5 Nm |
| Conductor cross section flexible max. (Key Commercial Data) | 1.5 mm² |
| Conductor cross section flexible min. (Key Commercial Data) | 0.75 mm² |
| Note on the internal connection method (Key Commercial Data) | Pos. 1: Brown; pos. 2: White; pos. 3: Blue; pos. 4: Green/yellow |
| Flammability rating according to UL 94 (Mechanical characteristics) | V0 |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter (General) | VDE 0295 Cl.2-5, min. wire diameter 0.2 mm |
Technical specifications and performance data
Installation and operation guide