In Stock Hot Product
Q 1,5/2L180/11KU-DSI
Q 1,5/2L180/11KU-DSI 1670277 PHOENIX CONTACT Panel feed-through
$0.00USD
4521 in stock
Key Specifications
GTIN:4017918146467
Note:Made to Order (non-returnable)
(Cabel):-25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.)
Orderkey:1670277
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918146467 |
| Note | Made to Order (non-returnable) |
| (Cabel) | -25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.) |
| Orderkey | 1670277 |
| Catalog page | Page 19 (PC-2002) |
| Packing unit | 10 pc |
| Country of origin | PL (Poland) |
| Custom tariff number | 85366990 |
| (Key Commercial Data) | Dip-solder connection |
| Minimum order quantity | 10 pc |
| Position marking (General) | 1, 2 |
| Color (Key Commercial Data) | green |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Degree of protection (Cabel) | IP65 |
| Connection (Key Commercial Data) | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| Locking type (Key Commercial Data) | Screw locking |
| Wire insulation material (General) | PVC / PE |
| Weight per Piece (excluding packing) | 22.110 g |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Ambient temperature (operation) (Cabel) | -25 °C ... 80 °C |
| Connection method (Key Commercial Data) | QUICKON connection |
| Nominal current IN (Ambient conditions) | 17.5 A |
| Number of positions (Key Commercial Data) | 2 |
| Rated voltage (II/2) (Ambient conditions) | 630 V |
| Rated voltage (III/2) (Ambient conditions) | 320 V |
| Rated voltage (III/3) (Ambient conditions) | 250 V |
| Impact category (Electrical characteristics) | 3 |
| Temperature when conductor connected (Cabel) | -5 °C ... 50 °C |
| Wire diameter including insulation (General) | >= 3 mm |
| Wrench size, union nut (Key Commercial Data) | 22 mm |
| Contact material (Mechanical characteristics) | Copper alloy |
| Connection in acc. with standard (Material data) | CUL |
| Degree of pollution (Mechanical characteristics) | 3 |
| Rated surge voltage (III/3) (Ambient conditions) | 6 kV |
| Overvoltage category (Mechanical characteristics) | III |
| Tightening torque, union nut (Key Commercial Data) | 2.5 Nm |
| Wrench size, contact carrier (Key Commercial Data) | 22 mm |
| PC QUICKON thread type (Electrical characteristics) | Pg11 |
| QUICKON connectability (Electrical characteristics) | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| Tightening torque, counter nut (Key Commercial Data) | 3.75 Nm |
| Contact carrier material (Mechanical characteristics) | PA 6.6 |
| Contact surface material (Mechanical characteristics) | Pre-nickel plated and tin-plated |
| Conductor cross section AWG max. (Key Commercial Data) | 16 |
| Conductor cross section AWG min. (Key Commercial Data) | 18 |
| Flammability rating according to UL 94 (Material data) | V0 |
| Tightening torque contact carrier (Key Commercial Data) | 3.75 Nm |
| Conductor cross section solid max. (Key Commercial Data) | 1.5 mm² |
| Conductor cross section solid min. (Key Commercial Data) | 0.75 mm² |
| Conductor cross section flexible max. (Key Commercial Data) | 1.5 mm² |
| Conductor cross section flexible min. (Key Commercial Data) | 0.75 mm² |
| Note on the internal connection method (Key Commercial Data) | The product must be screwed to the PCB before soldering. Self-tapping screws in acc. with ISO 1481-ST 2,9 x 6,5 C. |
| Flammability rating according to UL 94 (Mechanical characteristics) | V0 |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter (General) | VDE 0295 Cl.2-5, min. wire diameter 0.2 mm |
Product Description
External passage, for interior wall mounting, with dip welding connection, welding pin length: 3.8 mm, Ø 2-pole drill = 19.0 mm - 0.3
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
