

| Parameter | Value |
|---|---|
| GTIN | 4017918156961 |
| Note | Made to Order (non-returnable) |
| (Cabel) | -25 °C ... 50 °C (when the conductor is connected. Specifications of the cable manufacturer must also be observed.) |
| Orderkey | 1670727 |
| Catalog page | Page 16 (PC-2002) |
| Packing unit | 10 pc |
| Country of origin | PL (Poland) |
| Custom tariff number | 85369010 |
| (Key Commercial Data) | Manual solder/slip on connection |
| Minimum order quantity | 10 pc |
| Position marking (General) | 1, 2, 3 |
| Color (Key Commercial Data) | green |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Degree of protection (Cabel) | IP65 |
| Connection (Key Commercial Data) | If the conductor is reconnected, it must be cut off above the last contact point. QUICKON components may only be operated when under no load. |
| Locking type (Key Commercial Data) | Screw locking |
| Wire insulation material (General) | PVC / PE |
| Weight per Piece (excluding packing) | 16.270 g |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| Ambient temperature (operation) (Cabel) | -25 °C ... 80 °C (Specifications of the cable manufacturer must be observed.) |
| Connection method (Key Commercial Data) | QUICKON connection |
| Nominal current IN (Ambient conditions) | 9 A |
| Number of positions (Key Commercial Data) | 3 |
| Rated voltage (II/2) (Ambient conditions) | 320 V |
| Rated voltage (III/2) (Ambient conditions) | 160 V |
| Rated voltage (III/3) (Ambient conditions) | 160 V |
| Number of connections (Key Commercial Data) | 3 |
| Impact category (Electrical characteristics) | 3 |
| Temperature when conductor connected (Cabel) | -5 °C ... 50 °C |
| Wire diameter including insulation (General) | 2.5 mm |
| Wrench size, union nut (Key Commercial Data) | 19 mm |
| Contact material (Mechanical characteristics) | Cu alloy |
| Connection in acc. with standard (Material data) | CUL |
| Degree of pollution (Mechanical characteristics) | 3 |
| Rated surge voltage (III/3) (Ambient conditions) | 4 kV |
| Overvoltage category (Mechanical characteristics) | III |
| Tightening torque, union nut (Key Commercial Data) | 2.5 Nm |
| Wrench size, contact carrier (Key Commercial Data) | 19 mm |
| PC QUICKON thread type (Electrical characteristics) | Pg9 |
| QUICKON connectability (Electrical characteristics) | 10 (if the conductor is connected more than once, seal and cap may need to be replaced.) |
| Tightening torque, counter nut (Key Commercial Data) | 3.75 Nm |
| Contact carrier material (Mechanical characteristics) | PA |
| Contact surface material (Mechanical characteristics) | Pre-nickel plated and tin-plated |
| Note on the rated voltage (II/2) (Ambient conditions) | with insulating sleeve |
| Conductor cross section AWG max. (Key Commercial Data) | 18 |
| Conductor cross section AWG min. (Key Commercial Data) | 22 |
| Flammability rating according to UL 94 (Material data) | V0 |
| Note on the rated voltage (III/2) (Ambient conditions) | with insulating sleeve |
| Note on the rated voltage (III/3) (Ambient conditions) | with insulating sleeve |
| Tightening torque contact carrier (Key Commercial Data) | 3.75 Nm |
| Conductor cross section solid max. (Key Commercial Data) | 0.75 mm² |
| Conductor cross section solid min. (Key Commercial Data) | 0.34 mm² |
| Conductor cross section flexible max. (Key Commercial Data) | 0.75 mm² |
| Conductor cross section flexible min. (Key Commercial Data) | 0.34 mm² |
| Flammability rating according to UL 94 (Mechanical characteristics) | V0 |
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter (General) | Class 2-6 // 0.34 mm²: 0.1 mm; 0.5 - 0.75 mm²: 0.15 mm |
Technical specifications and performance data
Installation and operation guide