In Stock Hot Product
PTSM 0,5/ 3-2,5-V SMD R44
PTSM 0,5/ 3-2,5-V SMD R44 1771101 PHOENIX CONTACT PCB terminal block
$0.00USD
4296 in stock
Key Specifications
:0.2 mm² / flexible / > 10 N
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Pitch:2.5 mm
Result:Test passed
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Pitch | 2.5 mm |
| Result | Test passed |
| Process | Reflow soldering |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| ESD level | (D) electrostatically conductive |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 12.6 mm |
| Height [h] | 9 mm |
| Length [l] | 7 mm |
| Pin layout | Linear pad geometry |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Pad geometry | 1.4 x 3.4 mm |
| Product line | COMBICON Terminals XS |
| Product type | Printed circuit board terminal |
| Mounting type | SMD soldering |
| Specification | IEC 60998-2-2:2002-12 |
| Number of rows | 1 |
| Product family | PTSM 0,5/..-V-SMD |
| [W] tape width | 44 mm |
| Color (Housing) | black (9005) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 00 |
| Contact material | Cu alloy |
| Installed height | 9 mm |
| Stripping length | 6 mm |
| Time of exposure | 5 s |
| Connection method | Push-in spring connection |
| Type of packaging | 44 mm wide tape |
| [A] coil diameter | 330 mm |
| Nominal current IN | 6 A |
| Nominal voltage UN | 160 V |
| Dimensional drawing | |
| Insulating material | LCP |
| Note on application | Pick and place pads may protrude beyond the components. The PCB layout must ensure that collisions are avoided when components are assembled. |
| Number of positions | 3 |
| Number of potentials | 3 |
| Outer packaging type | Transparent-Bag |
| Rated voltage (II/2) | 160 V |
| Nominal cross section | 0.5 mm² |
| Number of connections | 3 |
| Rated voltage (III/2) | 160 V |
| Rated voltage (III/3) | 32 V |
| Test duration per axis | 2.5 h |
| Surface characteristics | hot-dip tin-plated |
| Moisture Sensitive Level | MSL 1 |
| Color (Actuating element) | black (9005) |
| Insulating material group | IIIa |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 175 |
| Rated surge voltage (II/2) | 2.5 kV |
| Conductor cross section AWG | 26 ... 20 |
| Rated surge voltage (III/2) | 2.5 kV |
| Rated surge voltage (III/3) | 2.5 kV |
| Solder cycles in the reflow | 3 |
| [W2] coil overall dimension | 50.4 mm |
| Classification temperature Tc | 260 °C |
| Conductor cross section rigid | 0.14 mm² ... 0.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 160 V |
| Conductor cross section flexible | 0.2 mm² ... 0.5 mm² (up to 0.75 mm² supported, with a stripping length of 7.5 mm and a rated insulation voltage of 32 V at III/2) |
| Rated insulation voltage (III/2) | 160 V |
| Rated insulation voltage (III/3) | 32 V |
| minimum creepage distance (II/2) | 1.6 mm |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| minimum creepage distance (III/2) | 1.6 mm |
| minimum creepage distance (III/3) | 1.3 mm |
| Cylindrical gauge a x b / diameter | - / 1.2 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI ≥175 to <400 |
| Metal surface soldering area (top layer) | Tin (4 - 8 µm Sn) |
| Metal surface terminal point (top layer) | Tin (4 - 8 µm Sn) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| minimum clearance value - non-homogenous field (II/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 1.5 mm |
| minimum clearance value - non-homogenous field (III/3) | 1.5 mm |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 0.34 mm² (possible from 0.14 mm², when using ferrule AI 0.14- 6 GY in combination with crimping pliers CRIMPFOX 10T-F) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.14 mm² / solid / > 10 N |
Product Description
Terminal block for printed circuit board, nominal current: 6 A, nominal voltage (III/2): 160 V, nominal section: 0.5 mm², number of potentials: 3, number of rows: 1, number of poles per row: 3, family
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
