In Stock Hot Product
PT 2,5/10-7,5-H
PT 2,5/10-7,5-H 1988189 PHOENIX CONTACT PCB terminal block
$0.00USD
4531 in stock
Key Specifications
:0.5 mm² / flexible / > 20 N
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Type:PC termination block
Pitch:7.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.5 mm² / flexible / > 20 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Type | PC termination block |
| Pitch | 7.5 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 75 mm |
| Height [h] | 17.6 mm |
| Length [l] | 9 mm |
| Pin layout | Linear pinning |
| Pin spacing | 7.5 mm |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product line | COMBICON Terminals M |
| Product type | Printed circuit board terminal |
| Hole diameter | 1.3 mm |
| Mounting type | Wave soldering |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Pin dimensions | ø 1 mm |
| Product family | PT 2,5/..-H |
| Color (Housing) | green (6021) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 06 |
| Contact material | Cu alloy |
| Installed height | 13.5 mm |
| Stripping length | 6.5 mm |
| Time of exposure | 5 s |
| Connection method | Screw connection with wire protector |
| Tightening torque | 0.45 Nm ... 0.5 Nm |
| Type of packaging | packed in cardboard |
| Nominal current IN | 32 A |
| Nominal voltage UN | 800 V |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 10 |
| Number of potentials | 10 |
| Rated voltage (II/2) | 1000 V |
| Nominal cross section | 2.5 mm² |
| Number of connections | 10 |
| Rated voltage (III/2) | 800 V |
| Rated voltage (III/3) | 500 V |
| Solder pin length [P] | 4.1 mm |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| Solder pins per potential | 1 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 6 kV |
| Conductor cross section AWG | 20 ... 10 |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (III/3) | 6 kV |
| Conductor cross section rigid | 0.5 mm² ... 4 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 1000 V |
| Conductor cross section flexible | 0.5 mm² ... 4 mm² |
| Note on connection cross section | With connected conductor 4 mm² (stranded). |
| Rated insulation voltage (III/2) | 800 V |
| Rated insulation voltage (III/3) | 500 V |
| minimum creepage distance (II/2) | 5.5 mm |
| Requirement temperature-rise test | The sum of ambient temperature and temperature rise of the PCB terminal block shall not exceed the upper limiting temperature. |
| minimum creepage distance (III/2) | 5.5 mm |
| minimum creepage distance (III/3) | 6.3 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface soldering area (top layer) | Tin (3 - 12 µm Sn) |
| Metal surface terminal point (top layer) | Tin (3 - 12 µm Sn) |
| 2 conductors with same cross section, solid | 0.5 mm² ... 1.5 mm² |
| Metal surface soldering area (middle layer) | Nickel (1.5 - 4 µm Ni) |
| Metal surface terminal point (middle layer) | Nickel (1.5 - 4 µm Ni) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| 2 conductors with same cross section, flexible | 0.5 mm² ... 1.5 mm² |
| minimum clearance value - non-homogenous field (II/2) | 5.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 5.5 mm |
| minimum clearance value - non-homogenous field (III/3) | 5.5 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.5 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.5 mm² ... 2.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.5 mm² / solid / > 20 N |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.5 mm² ... 0.75 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Product Description
Terminal block for printed circuit board, nominal current: 32 A, nominal voltage (III/2): 800 V, nominal section: 2.5 mm², number of potentials: 10, number of rows: 1, number of poles per row: 10, art
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
