In Stock Hot Product
PSR-SPP-24DC/ESP4/2X1/1X2
PSR-SPP- 24DC/ESP4/2X1/1X2 2981017 PHOENIX CONTACT Safety relays
$0.00USD
4571 in stock
Key Specifications
:Process technology
Depth:114.5 mm
Shock:15g
Width:22.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Process technology | |
| Depth | 114.5 mm |
| Shock | 15g |
| Width | 22.5 mm |
| Height | 112 mm |
| Category | 4 |
| pluggable | yes |
| Relay type | Electromechanical relay with force-guided contacts in accordance with IEC/EN 61810-3 |
| Application | Emergency stop |
| Filter time | max. 3 ms (Test pulse width of low test pulses) |
| Output fuse | 10 A gL/gG |
| Product type | Safety relays |
| Restart time | < 1 s (Boot time) |
| Mounting type | DIN rail mounting |
| Recovery time | ≥ 1 s (following demand of the safety function) |
| Stop category | 0 |
| Identification | CE-compliant |
| Inrush current | max. 1 A (typ. with US, Δt = |
| Product family | PSRclassic |
| Status display | LED (green) |
| Color (Housing) | yellow (RAL 1018) |
| Article revision | 08 |
| Contact material | AgSnO2 |
| Housing material | Polyamide |
| Maximum altitude | ≤ 2000 m (Above sea level) |
| Number of inputs | 1 |
| Stripping length | 8 mm |
| Connection method | Push-in connection |
| Mounting position | On horizontal and vertical DIN rail |
| Number of outputs | 2 |
| Sq. Total current | 72 A2(observe derating) |
| Switching voltage | min. 10 V |
| Output description | 2 N/O contacts each in series, safety-related, floating |
| Protective circuit | Suppressor diode |
| Switching capacity | min. 100 mW |
| Current consumption | 65 mA (typ. with US) |
| Note on application | Only for industrial use |
| Switching frequency | max. 0.5 Hz |
| Degree of protection | IP20 |
| Typical release time | typ. 20 ms (At Us/on demand via A1) |
| Standards/regulations | DIN EN 60947-1 |
| Typical response time | typ. 60 ms (For Usmanual, monitored start) |
| Vibration (operation) | 10 Hz ... 150 Hz, 2g |
| Contact switching type | 2 enabling current paths |
| Nominal operating mode | 100% operating factor |
| Performance level (PL) | e |
| Mechanical service life | approx. 107cycles |
| Description of the input | safety-related |
| Rated insulation voltage | 250 V |
| Operating voltage display | Green LED |
| Typ. starting time with Us | 60 ms (At Us/on demand via A1) |
| Conductor cross-section AWG | 24 ... 16 |
| Limiting continuous current | 6 A (Observe derating and load limit curve) |
| Safety Integrity Level (SIL) | 3 |
| Conductor cross section rigid | 0.2 mm² ... 1.5 mm² |
| Input voltage range "1" signal | 20.4 V ... 26.4 V |
| Rated surge voltage/insulation | See section “Insulation coordination” |
| Ambient temperature (operation) | -20 °C ... 55 °C (observe derating) |
| Conductor cross section flexible | 0.2 mm² ... 1.5 mm² |
| Interrupting rating (ohmic load) max. | Observe derating and load limit curve |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Min. degree of protection of inst. location | IP54 |
| Maximum interrupting rating (inductive load) | Observe derating and load limit curve |
| Max. permissible humidity (storage/transport) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible overall conductor resistance | 50 Ω |
| Max. permissible relative humidity (operation) | 75 % (on average, 85% infrequently, non-condensing) |
| Maximum power dissipation for nominal condition | 16.12 W (At US= 26.4 V, IL² = 72 A², PTotal max= 1.72 W + 14.4 W) |
| Switching capacity in accordance with IEC 60947-5-1 | 5 A (AC15) |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
Product Description
Safety relay for SIL 3 high- and low-demand applications, also approved according to EN 50156, Germanischer Lloyd and EN ISO 13849, emergency stop and safety door monitoring, single-channel, 2 trip ci
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
