In Stock Hot Product
PSR-SCP-24UC/ESA2/4X1/1X2/B
PSR-SCP- 24UC/ESA2/4X1/1X2/B 2963802 PHOENIX CONTACT Safety relays
$0.00USD
4367 in stock
Key Specifications
GTIN:4017918892661
Orderkey:2963802
Catalog page:Page 260 (C-6-2017)
Depth (Note):114.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918892661 |
| Orderkey | 2963802 |
| Catalog page | Page 260 (C-6-2017) |
| Depth (Note) | 114.5 mm |
| Packing unit | 1 pc |
| Width (Note) | 22.5 mm |
| (Input data) | 6 A gL/gG (N/C contact) |
| Height (Note) | 99 mm |
| (Output data) | IP54 |
| Country of origin | DE (Germany) |
| pluggable (General) | Yes |
| Custom tariff number | 85371098 |
| (Ambient conditions) | Test pulse rate = 5 x Test pulse width |
| Screw thread (General) | M3 |
| Net weight (Output data) | 210.5 g |
| Output fuse (Input data) | 10 A gL/gG (N/O contact) |
| Relay type (Output data) | Electromechanical relay with forcibly guided contacts in accordance with EN 50205 |
| Contact type (Input data) | 4 enabling current paths |
| Category (Connection data) | 1 (up to Cat. 4 depending on the application) |
| Stripping length (General) | 7 mm |
| Connection method (General) | Screw connection |
| Housing color (Output data) | yellow |
| Mounting type (Output data) | DIN rail mounting |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Input data) | AgSnO2 |
| Designation (Connection data) | EN 62061 |
| Maximum altitude (Dimensions) | ≤ 2000 m (Above sea level) |
| Housing material (Output data) | PBT |
| Sq. Total current (Input data) | 72 A2(observe derating) |
| Mounting position (Output data) | vertical or horizontal |
| Stop category (Connection data) | 0 |
| Filter time (Ambient conditions) | 2 ms (at A1 in the event of voltage dips at Us) |
| Degree of protection (Output data) | IP20 |
| Recovery time (Ambient conditions) | < 1 s |
| Assembly instructions (Output data) | See derating curve |
| Inrush current (Ambient conditions) | 2 A (Δt = 10 ms at Us) |
| Maximum inrush current (Input data) | 20 A (Δt 100 ms) |
| Status display (Ambient conditions) | 2 x green LEDs |
| Inrush current, minimum (Input data) | 10 mA |
| Mechanical service life (Input data) | 10x 106cycles |
| Nominal operating mode (Output data) | 100% operating factor |
| Switching capacity min. (Input data) | 50 mW |
| Weight per Piece (excluding packing) | 210.500 g |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Maximum switching voltage (Input data) | 250 V AC/DC (Observe the load curve) |
| Minimum switching voltage (Input data) | 5 V AC/DC |
| Protective circuit (Ambient conditions) | Surge protection Suppressor diode |
| Current consumption (Ambient conditions) | < 50 mA (with Us/Ixto S12) |
| Limiting continuous current (Input data) | 6 A (N/O contact, pay attention to the derating) |
| Performance level (PL) (Connection data) | c (up to PL e depending on the application) |
| Typical release time (Ambient conditions) | < 45 ms (when controlled via S12) |
| Conductor cross section AWG max. (General) | 12 |
| Conductor cross section AWG min. (General) | 24 |
| Shock (Safety-related characteristic data) | 15g |
| Typical response time (Ambient conditions) | < 65 ms (automatic start) |
| Ambient temperature (operation) (Dimensions) | -20 °C ... 65 °C (observe derating) |
| Conductor cross section solid max. (General) | 2.5 mm² |
| Conductor cross section solid min. (General) | 0.2 mm² |
| Power consumption at US (Ambient conditions) | typ. 3.36 W (AC) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Operating voltage display (Ambient conditions) | 1 x green LED |
| Safety Integrity Level (SIL) (Connection data) | 1 (up to SIL 3 depending on the application) |
| Switching capacity (360/h cycles) (Input data) | 4 A (24 V DC) |
| Conductor cross section flexible max. (General) | 2.5 mm² |
| Conductor cross section flexible min. (General) | 0.2 mm² |
| Typ. starting time with Us (Ambient conditions) | < 65 ms (when controlled via A1) |
| Conformance (Safety-related characteristic data) | CE-compliant |
| Designation (Safety-related characteristic data) | Air clearances and creepage distances between the power circuits |
| Maximum switching frequency (Ambient conditions) | 1 Hz |
| Interrupting rating (ohmic load) max. (Input data) | 144 W (24 V DC, τ = 0 ms) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 70 °C |
| Rated control supply current IS (Ambient conditions) | typ. 140 mA AC |
| Degree of pollution (Safety-related characteristic data) | 2 |
| Maximum interrupting rating (inductive load) (Input data) | 42 W (24 V DC, τ = 40 ms) |
| Min. degree of protection of inst. location (Output data) | IP54 |
| Overvoltage category (Safety-related characteristic data) | III |
| Max. permissible humidity (storage/transport) (Dimensions) | 75 % (on average, 85% infrequently, non-condensing) |
| Standards/regulations (Safety-related characteristic data) | DIN EN 50178/VDE 0160 |
| Vibration (operation) (Safety-related characteristic data) | 10 Hz ... 150 Hz, 2g |
| Max. permissible relative humidity (operation) (Dimensions) | 75 % (on average, 85% infrequently, non-condensing) |
| Rated control circuit supply voltage US (Ambient conditions) | 24 V AC/DC -15 % / +10 % |
| Rated insulation voltage (Safety-related characteristic data) | 250 V AC |
| Safety Integrity Level Claim Limit (SIL CL) (Connection data) | 1 (up to SILCL 3 depending on the application) |
| Voltage at input/start and feedback circuit (Ambient conditions) | 24 V DC -15 % / +10 % |
| Max. permissible overall conductor resistance (Ambient conditions) | approx. 22 Ω (Input and start circuits at US) |
| Rated surge voltage/insulation (Safety-related characteristic data) | Basic insulation 4 kV:between all current paths and housingSafe isolation, reinforced insulation 6 kV:between A1/A2 and 13/14, 23/24, 33/34, 43/44between S11/S12/S33/S34 and 13/14, 23/24, 33/34, 43/44between 51/52 and 13/14, 23/24, 33/34, 43/44 |
Product Description
Safety relay for emergency stop and safety doors up to SIL 1, category 1, PL c, depending on the application up to SIL 3, category 4, PL e, single-channel operation, 4 enabling circuits, US = 24 V DC,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
