In Stock Hot Product
PSR-SCP-24DC/URM4/5X1/2X2/B
PSR-SCP-24DC/URM4/5X1/2X2/B 1442344 PHOENIX CONTACT Contact expansion 1 or 2 channels, 5 NO contacts, 1 NC c..
$0.00USD
3433 in stock
Key Specifications
:max. 250 V AC/DC
Link:Screw connection
Depth:114.5 mm
Shock:15g
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| max. 250 V AC/DC | |
| Link | Screw connection |
| Depth | 114.5 mm |
| Shock | 15g |
| width | 22.5 mm |
| Thread | M3 |
| height | 99 mm |
| Marking | CE Compliance |
| plug-in | Yes |
| Category | 4 (in combination with a suitable measuring device) |
| Relay Type | Electromagnetic relay with forcibly guided contacts according to IEC/EN 61810-3 |
| Reset Time | < 1 s |
| Application | Expansion module |
| Output fuse | 10 A gL/gG |
| Product Type | Safety Relays |
| Mounting type | Rail Mounting |
| Stop category | 0 |
| Product Family | PSRclassic |
| Mechanical life | 10x 106Manoeuvring cycles |
| Contact material | AgSnO2 |
| Housing Material | Polyamide |
| Number of inputs | 1 |
| Stripping length | 7 mm |
| Switchable power | Min. 100 mW |
| Duty cycle report | 100 % ED |
| Number of outputs | 5 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Output Description | each 2 NO in series, safe, potential-free |
| Protection Circuit | Diode Suppressor |
| Switchable voltage | Min. 10 V |
| Current consumption | tip. 75 mA |
| Switching frequency | max. 1 Hz |
| arit. Total current | 72 A2(take into account derating) |
| Degree of protection | Ip20 |
| Entrance description | Security-oriented |
| Standards/Provisions | EN 60947-1 |
| Installation Location | Vertical or horizontal |
| Instantaneous current | Min. 10 mA |
| Typical Drop-Out Time | < 20 ms (Us/command via A1) |
| Vibration (operation) | 10 Hz ... 150 Hz, 0.15 mm amplitude, 2g |
| Contact Switching Type | 5 safety contacts |
| Performance Level (PL) | and (in combination with a suitable measuring device) |
| Permanent Load Current | 6 A (take into account derating) |
| Signal input range "1" | 19.2 V ... 26.4 V |
| Rated insulation voltage | 250 V |
| Installation instructions | See Derating curve |
| AWG conductor cross-section | 24 ... 12 |
| Operating voltage indication | 1 x Green LEDs |
| Safety Integrity Level (SIL) | 3 (in combination with a suitable measuring device) |
| Tip. Excitation time with Us | < 25 ms (Us/command via A1) |
| Rigid conductor cross-section | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (operating) | -20 °C ... 55 °C (take into account derating) |
| Breaking capacity IEC 60947-5-1 | 3 A (AC15) |
| Flexible conductor cross-section | 0.2 mm² ... 2.5 mm² |
| Impulse voltage sizing/isolation | See chapter Insulation coordination |
| Max. permissible cable resistance | 25 Ω |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Maximum permissible humidity (operation) | 75 % |
| Max. humidity. Permitted (storage/transport) | 75 % |
| Degree of protection Installation location min. | IP54 |
| Maximum power dissipation under nominal conditions | 16.6 W (US= 26.4 V, IL² = 72 A², PTotal max= 2.2 W + 14.4 W) |
Product Description
Extension of 1 or 2 channel contacts, 5 NO contacts, 1 NC contact, 1 feedback loop, together with base equipment safe separation up to cat.4 PLe depending on ENISO13849, width: 22.5mm, plug-in screw t
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
