Service time: Monday to Friday 9:00-18:00
PSR-SCP-24DC/TS/M - PSR-SCP- 24DC/TS/M 2986012 PHOENIX CONTACT Safety module
In Stock Hot Product

PSR-SCP-24DC/TS/M

PSR-SCP- 24DC/TS/M 2986012 PHOENIX CONTACT Safety module

$0.00USD
4660 in stock
Key Specifications
GTIN:4046356346979
(Times):IP54
Orderkey:2986012
(General):5 lbf-in. ... 7 lbf-in.
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support

Technical Specifications

ParameterValue
GTIN4046356346979
(Times)IP54
Orderkey2986012
(General)5 lbf-in. ... 7 lbf-in.
Catalog pagePage 293 (C-6-2017)
Depth (Note)114.5 mm
Packing unit1 pc
Width (Note)67.5 mm
Height (Note)99 mm
(Power supply)20 (Single-channel, up to SIL 2)
Torque (General)0.5 Nm ... 0.6 Nm
(Digital inputs)2 A (Total current of all outputs)
Country of originDE (Germany)
(Connection data)3 (2-channel parameterization)
Net weight (Times)154 g
pluggable (General)Yes
Custom tariff number85371098
(Ambient conditions)18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Housing color (Times)yellow
Mounting type (Times)DIN rail mounting
Screw thread (General)M3
Voltage (Clock outputs)24 V DC (Supply via 24 V/0 V)
Housing material (Times)Polyamide PA non-reinforced
Mounting position (Times)On horizontal DIN rail
Voltage (Digital outputs)24 V DC (Supply via 24 V/0 V)
Category (Connection data)2 (1-channel parameterization)
Stripping length (General)7 mm
Cable length (Power supply)max. 2000 m
Connection method (General)Screw connection
(Standards and Regulations)For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”
Degree of protection (Times)IP20
Test pulses (Digital inputs)< 1 ms
Designation (Connection data)EN 50156
Maximum altitude (Dimensions)max. 2000 m (See Appendix "Using PSR-TRISAFE modules at altitudes greater than 2000 m above sea level")
Recovery time (Alarm outputs)< 10 s
Response time (Alarm outputs)max. 30 ms (plus response time of PSR-TS-SDOR4)
Status display (Power supply)20 x LED green (1 LED per input)
Test pulses (Digital outputs)< 1 ms
Nominal operating mode (Times)100% operating factor
Number of inputs (Power supply)10 (Two-channel, up to SIL 3)
Output voltage (Digital inputs)< 5 V (Low state)
Status display (Digital inputs)4 x LED green (1 LED per output)
Stop category (Connection data)0
Filter time (Ambient conditions)typ. 20 ms (Load-dependent, in the event of voltage dips at US)
Leakage current (Digital inputs)max. 2 mA
Number of outputs (Clock outputs)4
Current consumption (Power supply)typ. 4 mA
Number of outputs (Digital inputs)4 (Safe semiconductor outputs, up to Cat. 4 in accordance with EN ISO 13849-1)
Output description (Clock outputs)Digital
Number of outputs (Digital outputs)2
Status display (Ambient conditions)3x LED green, 1x LED red
Max. inductive load (Digital inputs)See "Protective circuit"
Output description (Digital outputs)Digital
Weight per Piece (excluding packing)154.000 g
(Safety-related characteristic data)10g (Δt = 16 ms, continuous shock, 1000 shocks in each space direction)
Air pressure (operation) (Dimensions)70 kPa ... 108 kPa (up to 3000 m above sea level)
Max. capacitive load (Digital inputs)max. 1 µF (Electronic components)
China RoHS (Standards and Regulations)Environmentally Friendly Use Period = 50
Description of the input (Power supply)Digital, type HTL
Nominal output voltage (Digital inputs)24 V DC (Supply via 24 V/0 V)
Protective circuit (Ambient conditions)Yes, within the scope of the operating voltage limits
Performance level (PL) (Connection data)d (1-channel parameterization)
Short-circuit protection (Clock outputs)Yes
Short-circuit protection (Digital inputs)Yes
Conductor cross section AWG max. (General)12
Conductor cross section AWG min. (General)24
Short-circuit protection (Digital outputs)Yes
Limiting continuous current (Clock outputs)100 mA
Note on protection circuit (Digital inputs)Yes, within the scope of the operating voltage limits
Ambient temperature (operation) (Dimensions)-20 °C ... 55 °C
Conductor cross section solid max. (General)2.5 mm²
Conductor cross section solid min. (General)0.2 mm²
Limiting continuous current (Digital inputs)2 A (Per channel, see Derating)
Number of possible extension modules (Times)1 (Max. continuous current via PSR-TBUS: 4 A)
Air pressure (storage/transport) (Dimensions)66 kPa ... 108 kPa (up to 3500 m above sea level)
Input voltage range "0" signal (Power supply)0 V DC ... 5 V DC (for safe Off)
Input voltage range "1" signal (Power supply)11 V DC ... 30 V DC
Limiting continuous current (Digital outputs)100 mA
Nominal output voltage range (Digital inputs)18 V DC ... 30 V DC (Incl. all tolerances, incl. residual ripple)
Utilization restriction (Key Commercial Data)EMC: class A product, see manufacturer's declaration in the download area
Safety Integrity Level (SIL) (Connection data)max. 3 (Reference IEC 61508)
Conductor cross section flexible max. (General)2.5 mm²
Conductor cross section flexible min. (General)0.2 mm²
Designation (Safety-related characteristic data)Air clearances and creepage distances between the power circuits
Limiting continuous current (Ambient conditions)max. 6 A (For looped-through current paths A1/A1 and A2/A2)
Number of possible safe extension modules (Times)10 (Max. continuous current via PSR-TBUS: 4 A)
Min. degree of protection of inst. location (Times)IP54
Ambient temperature (storage/transport) (Dimensions)-20 °C ... 70 °C
Rated control supply current IS (Ambient conditions)typ. 110 mA
Shock (operation) (Safety-related characteristic data)10g (Δt = 11 ms, three shocks in each space direction)
Degree of pollution (Safety-related characteristic data)2
Overvoltage category (Safety-related characteristic data)III
Max. permissible humidity (storage/transport) (Dimensions)75 % (On average, 85 % occasionally)
Standards/regulations (Safety-related characteristic data)DIN EN 50178
Vibration (operation) (Safety-related characteristic data)2g
Max. permissible relative humidity (operation) (Dimensions)75 % (On average, 85 % occasionally)
Rated control circuit supply voltage US (Ambient conditions)24 V DC (A1/A2)
Safety Integrity Level Claim Limit (SIL CL) (Connection data)2 (1-channel parameterization)

Product Description

Freely configurable safety module with 20 safe inputs and 4 safe outputs; 4 warning switching outputs, 2 cycle outputs and 2 ground switching outputs; expandable with additional I/A modules, up to SIL
Key Features
  • Industrial grade quality
  • RoHS compliant
  • CE certified
  • 1-year warranty

Product Documents

Datasheet

Technical specifications and performance data

User Manual

Installation and operation guide

Top