In Stock Hot Product
PSR-MC31-2SDO-1DO-24DC-SP
PSR-MC31-2SDO-1DO-24DC-SP 1015503 PHOENIX CONTACT Safety relay module for safety shut-off mats, switching st..
$0.00USD
4857 in stock
Key Specifications
GTIN:4055626496467
Orderkey:1015503
(Drawings):
Depth (Note):114.5 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626496467 |
| Orderkey | 1015503 |
| (Drawings) | |
| Depth (Note) | 114.5 mm |
| Packing unit | 1 |
| Width (Note) | 12.5 mm |
| Height (Note) | 116.6 mm |
| (Power supply) | NPN, IEC 61131-2, type 3 |
| (Alarm outputs) | < 175 ms (manual, monitored start) |
| (Digital inputs) | max. 4.7 µF (1 A load) |
| ETIM 5.0 (eCl@ss) | EC001449 |
| ETIM 6.0 (eCl@ss) | EC001449 |
| ETIM 7.0 (eCl@ss) | EC001449 |
| (Digital outputs) | non-safety-related |
| Indication (Times) | 1 x red LED |
| Net weight (Times) | 104.382 g |
| pluggable (General) | Yes |
| Custom tariff number | 85371098 |
| Housing color (Times) | yellow |
| Mounting type (Times) | DIN rail mounting |
| Status display (Times) | 3 x green LED |
| Block diagram (Drawings) | |
| Housing material (Times) | PBT |
| Current (Digital outputs) | max. 100 mA |
| Input name (Power supply) | External release |
| Mounting position (Times) | vertical or horizontal |
| Voltage (Digital outputs) | approx. 22 V DC (Us- 2 V) |
| Filter time (Power supply) | max. 1.5 ms (Test pulse width of low test pulses) |
| Stripping length (General) | 8 mm |
| Connection method (General) | Push-in spring connection |
| Ohmic load (Digital inputs) | min. 12 Ω |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Degree of protection (Times) | IP20 |
| Output name (Digital inputs) | 14, 24 |
| Restart time (Alarm outputs) | < 250 ms (Boot time) |
| eCl@ss 8.0 (Classifications) | 27371819 |
| eCl@ss 9.0 (Classifications) | 27371819 |
| Assembly instructions (Times) | See derating curve |
| Designation (Digital outputs) | M1 |
| Inrush current (Power supply) | < 10 mA (Typically with US, Δt |
| Maximum altitude (Dimensions) | ≤ 2000 m (Above sea level) |
| Recovery time (Alarm outputs) | 250 ms (following demand of the safety function) |
| Response time (Alarm outputs) | < 10 ms (Take the extension of the response time into consideration if you switch several devices in sequence.) |
| Category (Connection capacity) | 4 |
| Nominal operating mode (Times) | 100% operating factor |
| Inrush current (Digital inputs) | max. 4.8 A (Δt = 10 ms) |
| Number of inputs (Power supply) | 1 |
| Output current (Digital inputs) | max. 2.4 A |
| Output voltage (Digital inputs) | ≥ 23 V DC (Us- 1 V) |
| Designation (Ambient conditions) | A1/A2 |
| Filter time (Ambient conditions) | 1 ms (For the logic. At A1 in the event of voltage dips at Us) |
| Leakage current (Digital inputs) | max. 1 mA (in the safe state) |
| Designation (Connection capacity) | EN 62061 |
| Operating voltage display (Times) | 1 x green LED |
| Current consumption (Power supply) | 7 mA |
| Min. load current (Digital inputs) | 2 mA |
| Number of outputs (Digital inputs) | 2 |
| Utilization restriction (Drawings) | EMC: class A product, see manufacturer's declaration in the download area |
| Inrush current (Ambient conditions) | < 5 A (Δt = 200 µs at Us) |
| Number of outputs (Digital outputs) | 1 |
| Output description (Digital inputs) | Safety-related digital outputs |
| Stop category (Connection capacity) | 0 |
| Type of protection (Digital inputs) | Freewheeling circuit for inductive loads |
| Concurrence input 1/2 (Power supply) | ∞ |
| Max. inductive load (Digital inputs) | max. 1 H |
| Output description (Digital outputs) | PNP |
| Switching frequency (Digital inputs) | 1 Hz (Resistive, inductive, capacitive) |
| (Safety-related characteristic data) | 50 V AC |
| Max. capacitive load (Digital inputs) | max. 10 µF (2.4 A load) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Conductor cross section solid (General) | 0.2 mm² ... 1.5 mm² |
| Description of the input (Power supply) | safety-related |
| Protective circuit (Ambient conditions) | Parallel protection against polarity reversal Suppressor diode Provide external protection, see safety notes. Fuse type: 5 A FF |
| Maximum inrush current (Digital outputs) | 500 mA (Δt = 1 ms at Us) |
| Typical pickup time at US (Alarm outputs) | < 200 ms (with Uswhen controlled via A1) |
| Conductor cross section flexible (General) | 0.2 mm² ... 1.5 mm² |
| Shock (Safety-related characteristic data) | 30g |
| Short-circuit protection (Digital outputs) | Yes |
| Protective circuit/component (Power supply) | Suppressor diode |
| Typical response time at US (Alarm outputs) | < 200 ms (automatic start) |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 70 °C (observe derating) |
| Performance level (PL) (Connection capacity) | e |
| Power consumption at US (Ambient conditions) | typ. 1.3 W |
| Conductor cross section AWG / kcmil (General) | 24 ... 16 |
| Input current range "0" signal (Power supply) | 0 mA ... 2 mA (S10, S12) |
| Input voltage range "0" signal (Power supply) | 0 V DC ... 5 V DC |
| Input voltage range "1" signal (Power supply) | 11 V DC ... 30 V DC |
| Protective circuit/component (Digital outputs) | Suppressor diode |
| Conformance (Safety-related characteristic data) | CE-compliant |
| Designation (Safety-related characteristic data) | Air clearances and creepage distances between the power circuits |
| Output voltage when switched off (Digital inputs) | < 5 V DC (in the safe state) |
| Safety Integrity Level (SIL) (Connection capacity) | 3 |
| Min. degree of protection of inst. location (Times) | IP54 |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 70 °C |
| Rated control supply current IS (Ambient conditions) | typ. 54 mA (No load) |
| Degree of pollution (Safety-related characteristic data) | 2 |
| Overvoltage category (Safety-related characteristic data) | III |
| Max. permissible humidity (storage/transport) (Dimensions) | 75 % (on average, 85% infrequently, non-condensing) |
| Standards/regulations (Safety-related characteristic data) | DIN EN 50178, EN 60947-5-1 |
| Vibration (operation) (Safety-related characteristic data) | 10 Hz ... 150 Hz, 5g |
| Max. permissible relative humidity (operation) (Dimensions) | 75 % (on average, 85% infrequently, non-condensing) |
| Max. permissible overall conductor resistance (Power supply) | 150 Ω |
| Rated control circuit supply voltage US (Ambient conditions) | 24 V DC -20 % / +25 % (provide external protection) |
| Rated insulation voltage (Safety-related characteristic data) | 50 V |
| Safety Integrity Level Claim Limit (SIL CL) (Connection capacity) | 3 |
| Rated surge voltage/insulation (Safety-related characteristic data) | Basic insulation 4 kV between all current paths and housing |
| Limitation of the voltage induced on circuit interruption (Digital inputs) | max. 50 V |
| Conductor cross section, flexible, with ferrule, with plastic sleeve (General) | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
| Conductor cross section flexible, with ferrule without plastic sleeve (General) | 0.25 mm² ... 1.5 mm² (only together with CRIMPFOX 6) |
Product Description
Safety switching device for safety mats, switching buses, emergency stops, safety gates, light curtains up to SIL 3, cat. 4, PL e, single-channel or dual-channel mode, manual or automatic start, 2 saf
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
Block diagram
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
