In Stock Hot Product
PSPT 2,5/ 4-ST KMGY TP T1-T2
PSPT 2,5/ 4-ST KMGY TP T1-T2 1452132 PHOENIX CONTACT Connector for printed circuit board, nominal section: 2..
$4.17USD
2437 in stock
Key Specifications
:• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Pitch:5 mm
Result:Test passed
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Pitch | 5 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Width [w] | 19.95 mm |
| Height [h] | 15 mm |
| Length [l] | 21.3 mm |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Sweep speed | 1 octave/min |
| Locking type | without |
| Product type | PCB connector |
| No. of cycles | 25 |
| Specification | IEC 60999-1:1999-11 |
| Number of rows | 1 |
| Product family | PSPT 2,5/..-ST |
| Thermal stress | 105 °C/168 h |
| Color (Housing) | light grey (7035) |
| Mounting flange | without |
| Contact material | Cu alloy |
| Corrosive stress | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Stripping length | 10 mm |
| Connection method | Push-in spring connection |
| Type of packaging | packed in cardboard |
| Nominal current IN | 16 A |
| Nominal voltage UN | 300 V |
| Notes on operation | In accordance with IEC 61984, COMBICON connectors have no switching power (COC). During designated use, they must not be plugged in or disconnected when carrying voltage or under load. |
| Degree of pollution | 3 |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 4 |
| Number of potentials | 4 |
| Outer packaging type | Carton |
| Rated voltage (II/2) | 600 V |
| Nominal cross section | 2.5 mm² |
| Number of connections | 4 |
| Rated voltage (III/2) | 300 V |
| Rated voltage (III/3) | 300 V |
| Test duration per axis | 2.5 h |
| Contact connection type | Socket |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 4 kV |
| Tested number of positions | 4 |
| Conductor cross section AWG | 24 ... 14 |
| Rated surge voltage (III/2) | 4 kV |
| Rated surge voltage (III/3) | 4 kV |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 105 °C (dependent on the derating curve) |
| Rated insulation voltage (II/2) | 600 V |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Rated insulation voltage (III/2) | 300 V |
| Rated insulation voltage (III/3) | 300 V |
| Power-frequency withstand voltage | 2.21 kV |
| minimum creepage distance (III/3) | 3.2 mm |
| Conductor/PCB connection direction | 0 ° |
| Cylindrical gauge a x b / diameter | 2.8 mm x 2.0 mm / 2.4 mm |
| Withdraw strength per pos. approx. | 8 N |
| Insertion strength per pos. approx. | 13 N |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Metal surface contact area (top layer) | Tin (Sn) |
| Ambient temperature (storage/transport) | -40 °C ... 55 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface terminal point (top layer) | Tin (Sn) |
| Insulation resistance, neighboring positions | > 30 GΩ |
| minimum clearance value - non-homogenous field (III/3) | 3 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 2.5 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
| 2 conductors with same cross section, flexible, with ferrule without plastic sleeve | 0.25 mm² ... 0.34 mm² |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 1.5 mm² |
Product Description
PCB connector, nominal cross-section: 2.5 mm², colour: luminous grey, nominal current: 16 A, nominal voltage (III/2): 300 V, surface contacts: Tin, contact type: Female, number of potentials: 4, numbe
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
