In Stock Hot Product
PSI-MOS-RS485W2/FO 660 E
PSI-MOS-RS485W2/FO 660 E 2708313 PHOENIX CONTACT FO converters
$0.00USD
3218 in stock
Key Specifications
GTIN:4017918974015
Orderkey:2708313
Catalog page:Page 329 (C-6-2017)
Depth (Note):105 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4017918974015 |
| Orderkey | 2708313 |
| Catalog page | Page 329 (C-6-2017) |
| Depth (Note) | 105 mm |
| Packing unit | 1 pc |
| Width (Note) | 35 mm |
| Height (Note) | 99 mm |
| (Power supply) | 390 Ω (Can be connected) |
| Country of origin | DE (Germany) |
| (Digital outputs) | Class I, Div. 2, Groups A, B, C, D |
| (Serial interface) | PCF fiber |
| Custom tariff number | 85176200 |
| (Ambient conditions) | Class I, Div. 2, Groups A, B, C, D |
| Altitude (Dimensions) | 5000 m (For restrictions see manufacturer's declaration) |
| ATEX (Digital outputs) | II 3 G Ex nA nC IIC T4 Gc X |
| (Optical interface FO) | 42 V AC |
| Shock (Digital outputs) | 15g in all directions in acc. with IEC 60068-2-27 |
| Signal (Digital outputs) | ± 1 kV |
| ATEX (Ambient conditions) | II 3 G Ex nA nC IIC T4 Gc X (Please follow the special installation instructions in the documentation!) |
| MTBF (Ambient conditions) | 358 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| Color (Ambient conditions) | green |
| Comments (Digital outputs) | Criterion B |
| Interface 1 (Power supply) | RS-485 interface, 2-wire |
| Connection method (General) | COMBICON plug-in screw terminal block |
| Noise immunity (Dimensions) | EN 61000-6-2:2005 |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| DNV GL-EMC (Digital outputs) | B |
| Conformance (Digital outputs) | CE-compliant |
| Operating mode (Power supply) | Semi-duplex |
| Test result (Digital outputs) | 15g, 11 ms period, half-sine shock pulse |
| Wavelength (Serial interface) | 660 nm |
| Bit delay (Ambient conditions) | ≤ 1 bit |
| Supply voltage range (General) | 18 V DC ... 30 V DC |
| Type of test (Digital outputs) | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 |
| Net weight (Ambient conditions) | 186.98 g |
| Conformance (Ambient conditions) | CE-compliant |
| Connection method (Power supply) | Pluggable screw connection |
| Noise emission (Digital outputs) | EN 55011 |
| Noise immunity (Digital outputs) | EN 61000-6-2:2005 |
| Nominal supply voltage (General) | 24 V DC (With UL approval) |
| UL, USA/Canada (Digital outputs) | Class I, Zone 2, AEx nc IIC T5 |
| DNV GL-Humidity (Digital outputs) | A |
| Degree of protection (Dimensions) | IP20 |
| File format/coding (Power supply) | UART (11/10 bit switchable; NRZ), slip-tolerant |
| DNV GL-Enclosure (Digital outputs) | Required protection according to the Rules shall be provided upon installation on board |
| DNV GL-Vibration (Digital outputs) | A |
| Max. current consumption (General) | 130 mA |
| Noxious gas test (Digital outputs) | ISA-S71.04-1985 G3 Harsh Group A |
| Output name (Optical interface FO) | Relay output |
| Transmission length (Power supply) | ≤ 1200 m (depending on the data rate, with shielded, twisted data cable) |
| Transmission medium (Power supply) | Copper |
| Contact discharge (Digital outputs) | ± 6 kV |
| Noise emission (Ambient conditions) | EN 55011 |
| Termination resistor (Power supply) | 390 Ω |
| UL, USA/Canada (Ambient conditions) | Class I, Zone 2, AEx nc IIC T5 |
| Connection method (Serial interface) | F-SMA |
| DNV GL-Temperature (Digital outputs) | B |
| Weight per Piece (excluding packing) | 186.980 g |
| Housing material (Ambient conditions) | PA 6.6-FR |
| Overrange receiver (Serial interface) | -3 dBm (980/1000 µm) |
| Typical current consumption (General) | 100 mA (24 V DC) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Transmission medium (Serial interface) | Polymer fiber |
| Data direction switching (Power supply) | Automatic control |
| Shipbuilding approval (Digital outputs) | DNV GL |
| Standards/regulations (Digital outputs) | EN 55011 |
| Vibration (operation) (Digital outputs) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Number of outputs (Optical interface FO) | 1 |
| Serial transmission speed (Power supply) | 4.8/ 9.6/ 19.2/ 38.4/ 57.6/ 75/ 93.75/ 115.2/ 136/ 187.5/ 375/ 500 kbps |
| Transmission protocol (Serial interface) | Protocol-transparent to the RS-485 interface |
| Electrical isolation (Ambient conditions) | VCC // RS-485 |
| Output description (Optical interface FO) | Alarm output |
| Bit distortion, input (Ambient conditions) | ± 35 % (permitted) |
| Bit distortion, output (Ambient conditions) | < 6.25 % |
| Ambient temperature (operation) (Dimensions) | -20 °C ... 60 °C |
| Permissible humidity (operation) (Dimensions) | 30 % ... 95 % (non-condensing) |
| Transmit capacity, minimum (Serial interface) | -4.6 dBm (980/1000 µm) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Conductor cross section AWG max. (Power supply) | 14 |
| Conductor cross section AWG min. (Power supply) | 24 |
| Electromagnetic compatibility (Digital outputs) | Conformance with EMC Directive 2014/30/EU |
| Minimum receiver sensitivity (Serial interface) | -30.2 dBm |
| Maximum switching voltage (Optical interface FO) | 60 V DC |
| Conductor cross section solid max. (Power supply) | 2.5 mm² |
| Conductor cross section solid min. (Power supply) | 0.2 mm² |
| Connection in acc. with standard (Digital outputs) | CUL |
| Electromagnetic compatibility (Ambient conditions) | Conformance with EMC Directive 2014/30/EU |
| Limiting continuous current (Optical interface FO) | 0.46 A |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible max. (Power supply) | 2.5 mm² |
| Conductor cross section flexible min. (Power supply) | 0.2 mm² |
| Test voltage data interface/power supply (Ambient conditions) | 1.5 kVrms(50 Hz, 1 min.) |
| Transmission length incl. 3 dB system reserve (Serial interface) | 100 m (With F-P 980/1000 230 dB/km with quick mounting connector) |
| Free from substances that could impair the application of coating (Digital outputs) | according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard |
Product Description
Fiber optic converter with integrated optical diagnostics, alarm contact, for RS-485 2-wire bus systems (SUCONET K, Modbus ...) up to 500 kBit/s, NRZ coding, terminal equipment with fiber optic interf
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
