

| Parameter | Value |
|---|---|
| GTIN | 4046356513814 |
| Orderkey | 2313986 |
| (General) | EN 61000-4-6 |
| Catalog page | Page 327 (C-6-2017) |
| Depth (Note) | 119 mm |
| Packing unit | 1 pc |
| Width (Note) | 35 mm |
| Height (Note) | 102 mm |
| ATEX (General) | II 3 G Ex nA IIC T4 Gc X |
| (Power supply) | 102 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
| Shock (General) | 15g in all directions in acc. with IEC 60068-2-27 |
| Signal (General) | ± 1 kV |
| Country of origin | DE (Germany) |
| Comments (General) | Criterion B |
| (Serial interface) | Multi-mode fiberglass |
| ATEX (Power supply) | II 3 G Ex nA IIC T4 Gc X (Please follow the special installation instructions in the documentation!) |
| MTBF (Power supply) | 400 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTTF (Power supply) | 543 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day)) |
| Color (Power supply) | green |
| Custom tariff number | 85176200 |
| DNV GL-EMC (General) | B |
| (Ambient conditions) | ≤ 128 (CANopen®, can be addressed logically) |
| Altitude (Dimensions) | 5000 m (For restrictions see manufacturer's declaration) |
| Conformance (General) | CE-compliant |
| Test result (General) | 15g, 11 ms period, half-sine shock pulse |
| Type of test (General) | Shock in acc. with EN 60068-2-27/IEC 60068-2-27 |
| Noise emission (General) | EN 55011 |
| Noise immunity (General) | EN 61000-6-2 |
| UL, USA/Canada (General) | 508 Listed |
| DNV GL-Humidity (General) | A |
| Net weight (Power supply) | 250.3 g |
| Conformance (Power supply) | CE-compliant |
| DNV GL-Enclosure (General) | Required protection according to the Rules shall be provided upon installation on board |
| DNV GL-Vibration (General) | A |
| Dimensional drawing (Note) | |
| Noxious gas test (General) | ISA-S71.04-1985 G3 Harsh Group A |
| Contact discharge (General) | ± 6 kV |
| Noise immunity (Dimensions) | EN 61000-6-2 |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| DNV GL-Temperature (General) | B |
| Noise emission (Power supply) | EN 55011 |
| UL, USA/Canada (Power supply) | 508 Listed |
| Wavelength (Serial interface) | 850 nm |
| Housing material (Power supply) | PA 6.6-FR |
| Shipbuilding approval (General) | DNV GL |
| Standards/regulations (General) | EN 55011 |
| Vibration (operation) (General) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Interface 1 (Ambient conditions) | CAN interface, in accordance with ISO/IS 11898 for DeviceNet, CAN, CANopen |
| Degree of protection (Dimensions) | IP20 |
| No. of ports (Ambient conditions) | 2 (CAN_High / CAN_Low) |
| Output name (Optical interface FO) | Relay output |
| Contact type (Optical interface FO) | N/O contact |
| Electrical isolation (Power supply) | VCC // CAN |
| Operating mode (Ambient conditions) | Semi-duplex |
| Bit distortion, input (Power supply) | ± 35 % (permitted) |
| Connection method (Serial interface) | B-FOC (ST®) |
| Weight per Piece (excluding packing) | 250.300 g |
| Bit distortion, output (Power supply) | < 6.25 % |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Connection method (Ambient conditions) | COMBICON plug-in screw terminal block |
| Supply voltage range (Digital outputs) | 11 V DC ... 30 V DC (via pluggable COMBICON screw terminal block) |
| Transmission medium (Serial interface) | PCF fiber |
| Electromagnetic compatibility (General) | Conformance with EMC Directive 2014/30/EU |
| File format/coding (Ambient conditions) | Bit stuffing, NRZ |
| Nominal supply voltage (Digital outputs) | 24 V DC (With UL approval) |
| Number of outputs (Optical interface FO) | 1 |
| Transmission length (Ambient conditions) | ≤ 5000 m (Dependent on the data rate and the protocol used) |
| Transmission medium (Ambient conditions) | 2-wire twisted pair, shielded |
| Transmission method (Ambient conditions) | CSMA/CA |
| Transmission protocol (Serial interface) | Protocol transparent for CAN interface |
| Termination resistor (Ambient conditions) | 124 Ω (Integrated and ready to be switched) |
| Number of bus devices (Ambient conditions) | ≤ 64 (per potential segment) |
| Ambient temperature (operation) (Dimensions) | -20 °C ... 60 °C |
| Electromagnetic compatibility (Power supply) | Conformance with EMC Directive 2014/30/EU |
| Permissible humidity (operation) (Dimensions) | 30 % ... 95 % (non-condensing) |
| Transmit capacity, minimum (Serial interface) | -14.5 dBm (50/125 µm) |
| Typical current consumption (Digital outputs) | 150 mA (24 V DC) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Minimum receiver sensitivity (Serial interface) | -28.1 dBm (50/125 µm) |
| Maximum switching voltage (Optical interface FO) | 30 V DC |
| Minimum switching voltage (Optical interface FO) | 11 V DC |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section AWG max. (Ambient conditions) | 14 |
| Conductor cross section AWG min. (Ambient conditions) | 24 |
| Conductor cross section solid max. (Ambient conditions) | 2.5 mm² |
| Conductor cross section solid min. (Ambient conditions) | 0.2 mm² |
| Test voltage data interface/power supply (Power supply) | 1.5 kVrms(50 Hz, 1 min.) |
| Conductor cross section flexible max. (Ambient conditions) | 2.5 mm² |
| Conductor cross section flexible min. (Ambient conditions) | 0.2 mm² |
| Transmission length incl. 3 dB system reserve (Serial interface) | 4200 m (with F-G 50/125 2.5 dB/km) |
| Free from substances that could impair the application of coating (General) | according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard |
Technical specifications and performance data
Installation and operation guide