

| Parameter | Value |
|---|---|
| GTIN | 4046356509220 |
| Orderkey | 2313669 |
| (General) | 5 V DC (configuration only, via mini-USB type B) |
| Catalog page | Page 363 (C-6-2017) |
| Depth (Note) | 114.5 mm |
| Packing unit | 1 pc |
| Width (Note) | 35 mm |
| Height (Note) | 99 mm |
| (Power supply) | 2-wire operation: 32 kbps ... 15.3 Mbps |
| Country of origin | DE (Germany) |
| Custom tariff number | 85176200 |
| (Ambient conditions) | 121 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) |
| Altitude (Dimensions) | 5000 m (For restrictions see manufacturer's declaration) |
| ATEX (Digital outputs) | II 3 G Ex nA nC IIC T4 Gc X |
| Output name (Function) | Digital output |
| Shock (Digital outputs) | 15g in all directions in acc. with IEC 60068-2-27 |
| Interface (Power supply) | RS-485 |
| ATEX (Ambient conditions) | II 3 G Ex nA nC IIC T4 Gc X (Please follow the special installation instructions in the documentation!) |
| MTBF (Ambient conditions) | 1004 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) |
| MTTF (Ambient conditions) | 693 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day)) |
| Color (Ambient conditions) | green |
| Interface 1 (Power supply) | V.24 (RS-232) interface in acc. with ITU-T V.28, EIA/TIA-232, DIN 66259-1 |
| Interface 2 (Power supply) | SHDSL interface according to ITU-T G.991.2.bis |
| Interface 3 (Power supply) | USB 2.0 |
| Interface 4 (Power supply) | RS-422 interface in acc. with ITU-T V.11, EIA/TIA-422, DIN 66348-1 |
| Interface 5 (Power supply) | RS-485 interface, in acc. with EIA/TIA-485, DIN 66259-4/RS-485 2-wire |
| Connection method (General) | COMBICON plug-in screw terminal block |
| Noise immunity (Dimensions) | EN 61000-6-2 |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Number of outputs (Function) | 2 |
| Conformance (Digital outputs) | CE-compliant |
| Management (Serial interface) | User-friendly software: Guided configuration, plausibility checks, diagnostic functions, log book |
| Supply voltage range (General) | 18 V DC ... 30 V DC |
| Net weight (Ambient conditions) | 339.4 g |
| Conformance (Ambient conditions) | CE-compliant |
| Connection method (Power supply) | Plug-in/screw connection via COMBICON |
| Current output signal (Function) | ≤ 150 mA (Short-circuit-proof) |
| Noise emission (Digital outputs) | EN 55011 |
| Noise immunity (Digital outputs) | EN 61000-6-2 |
| Nominal supply voltage (General) | 24 V DC ±5 % (as an alternative or redundant, via backplane bus contact and system current supply) |
| UL, USA/Canada (Digital outputs) | cULus listed UL 508 |
| Voltage output signal (Function) | depending on the operating voltage |
| Degree of protection (Dimensions) | IP20 |
| File format/coding (Power supply) | Serial asynchronous UART/NRZ, 7/8 data, 1/2 stop, 1 parity, 10/11-bit character length |
| Behavior of the outputs (Function) | Deactivated for device supply via DIN rail connector |
| Noxious gas test (Digital outputs) | ISA-S71.04-1985 G3 Harsh Group A |
| Protocols supported (Power supply) | Transparent, including 3964R protocol |
| Transmission length (Power supply) | up to 1200 m |
| Noise emission (Ambient conditions) | EN 55011 |
| Termination resistor (Power supply) | 390 Ω - 180 Ω - 390 Ω (can be connected) |
| UL, USA/Canada (Ambient conditions) | cULus listed UL 508 |
| Weight per Piece (excluding packing) | 339.400 g |
| Housing material (Ambient conditions) | PA 6.6-FR |
| Typical current consumption (General) | < 180 mA (24 V DC) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Vibration (operation) (Digital outputs) | in acc. with IEC 60068-2-6: 5g, 150 Hz |
| Serial transmission speed (Power supply) | 1.2/2.4/4.8/7.0/9.6/19.2/38.4/57.6/75/93.75/115.2/136/187.5/375/500/1500/2000 kbps, NRZ |
| Electrical isolation (Ambient conditions) | DIN EN 50178 (VCC, RS-232 // RS-422, RS-485 // DSL (A) // DSL (B) // FE) |
| Data flow control/protocols (Power supply) | Automatic control // Modbus RTU/ASCII |
| Ambient temperature (operation) (Dimensions) | -20 °C ... 60 °C (for derating, see technical documentation) |
| Permissible humidity (operation) (Dimensions) | 10 % ... 95 % (non-condensing) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Conductor cross section AWG max. (Power supply) | 13 |
| Conductor cross section AWG min. (Power supply) | 24 |
| Electromagnetic compatibility (Digital outputs) | Conformance with EMC Directive 2014/30/EU |
| Conductor cross section solid max. (Power supply) | 2.5 mm² |
| Conductor cross section solid min. (Power supply) | 0.2 mm² |
| Electromagnetic compatibility (Ambient conditions) | Conformance with EMC Directive 2014/30/EU |
| Status and diagnostic indicators (Serial interface) | LEDs: VCC (supply voltage), RD/TD (serial data traffic), ERR (errors), TERM (termination resistor active), RS-232 (RS-232 active)2 x LINK / 2 x STAT (DSL data traffic port A and port B), DIAG (diagnostic messages) |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section flexible max. (Power supply) | 2.5 mm² |
| Conductor cross section flexible min. (Power supply) | 0.2 mm² |
| Permissible humidity (storage/transport) (Dimensions) | 10 % ... 95 % (non-condensing) |
| Test voltage data interface/power supply (Ambient conditions) | 1.5 kVrms(50 Hz, 1 min.) |
Technical specifications and performance data
Installation and operation guide