In Stock Hot Product
PLH 5/ 1-7,5 RD
PLH 5/ 1-7,5 RD 1065057 PHOENIX CONTACT Terminal for printed circuit board, pitch: 7.5 mm, number of poles: ..
$0.00USD
4928 in stock
Key Specifications
:0.2 mm² / flexible / > 10 N
Note:WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201
Pitch:7.5 mm
Result:Test passed
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Note | WEEE/RoHS-compliant, free of whiskers according to IEC 60068-2-82/JEDEC JESD 201 |
| Pitch | 7.5 mm |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Pin layout | Zigzag pinning M |
| Sweep speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Product line | COMBICON Terminals L |
| Product type | Printed circuit board terminal |
| Mounting type | Wave soldering |
| Specification | IEC 60998-2-2:2002-12 |
| Number of rows | 1 |
| Pin dimensions | 1.2 x 1.5 mm |
| Product family | PLH 5/ |
| Color (Housing) | red (3001) |
| Test directions | X-, Y- and Z-axis |
| Article revision | 01 |
| Contact material | Cu alloy |
| Stripping length | 12 mm |
| Time of exposure | 5 s |
| Connection method | Push-lock spring connection |
| Nominal current IN | 41 A |
| Nominal voltage UN | 1000 V |
| Notes on operation | The single-position PCB terminal block can be used for voltages up to 1500 V (DC) and 1000 V (AC). The relevant device standard and the appropriate required air clearances and creepage distances should be observed following installation |
| Dimensional drawing | |
| Insulating material | PA |
| Number of positions | 1 |
| Rated voltage (II/2) | 1000 V |
| Nominal cross section | 6 mm² |
| Rated voltage (III/2) | 1000 V |
| Rated voltage (III/3) | 500 V |
| Test duration per axis | 2.5 h |
| Surface characteristics | Tin-plated |
| Insulating material group | I |
| Solder pins per potential | 2 |
| CTI according to IEC 60112 | 600 |
| Rated surge voltage (II/2) | 6 kV |
| Conductor cross section AWG | 24 ... 10 |
| Rated surge voltage (III/2) | 6 kV |
| Rated surge voltage (III/3) | 6 kV |
| Conductor cross section rigid | 0.2 mm² ... 6 mm² |
| Ambient temperature (assembly) | -5 °C ... 100 °C |
| Ambient temperature (operation) | -40 °C ... 100 °C (Depending on the current carrying capacity/derating curve) |
| Rated insulation voltage (II/2) | 1000 V |
| Conductor cross section flexible | 0.2 mm² ... 6 mm² |
| Rated insulation voltage (III/2) | 1000 V |
| Rated insulation voltage (III/3) | 500 V |
| minimum creepage distance (II/2) | 5 mm |
| Requirement temperature-rise test | Increase in temperature ≤ 45 K |
| minimum creepage distance (III/2) | 5 mm |
| minimum creepage distance (III/3) | 12.5 mm |
| Relative humidity (storage/transport) | 30 % ... 70 % |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Comparative tracking index (IEC 60112) | CTI 600 |
| Metal surface soldering area (top layer) | Tin (10 - 16 µm Sn) |
| Metal surface terminal point (top layer) | Tin (10 - 16 µm Sn) |
| Insulation resistance, neighboring positions | > 5 MΩ |
| minimum clearance value - non-homogenous field (II/2) | 5.5 mm |
| minimum clearance value - non-homogenous field (III/2) | 8 mm |
| minimum clearance value - non-homogenous field (III/3) | 8 mm |
| Glow wire flammability index GWFI according to EN 60695-2-12 | 850 |
| Glow wire ignition temperature GWIT according to EN 60695-2-13 | 775 |
| Temperature for the ball pressure test according to EN 60695-10-2 | 125 °C |
| Conductor cross section, flexible, with ferrule, with plastic sleeve | 0.2 mm² ... 6 mm² |
| Conductor cross section flexible, with ferrule without plastic sleeve | 0.2 mm² ... 6 mm² |
| Conductor cross section/conductor type/tractive force setpoint/actual value | 0.2 mm² / solid / > 10 N |
| 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve | 0.5 mm² ... 2.5 mm² |
Product Description
Printed circuit board terminal block, nominal current: 41 A, dimensioning voltage (III/2): 1000 V, nominal cross-section: 6 mm², Number of rows: 1, Number of poles per row: 1, article family: PLH 5/,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
