In Stock Hot Product
PLC-RSC-48DC/21AU
PLC-RSC- 48DC/21AU 2966126 PHOENIX CONTACT Relay Module
$0.00USD
4393 in stock
Key Specifications
:Freewheeling diode; Freewheeling diode
EMC:B
Note:the following values are applicable if a gold layer is destroyed
Color:gray (RAL 7042)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Freewheeling diode; Freewheeling diode | |
| EMC | B |
| Note | the following values are applicable if a gold layer is destroyed |
| Color | gray (RAL 7042) |
| Depth | 94 mm |
| Width | 6.2 mm |
| Height | 80 mm |
| Humidity | A |
| Enclosure | Required protection according to the Rules shall be provided upon installation on board |
| Vibration | B/C |
| Application | Universal |
| Certificate | CE-compliant |
| Output fuse | 4 A gL/gG NEOZED |
| Temperature | D |
| Product type | Relay Module |
| Screw thread | M3 |
| Assembly note | in rows with zero spacing |
| Mounting type | DIN rail mounting |
| Identification | ISA-S71.04. G3 Harsh Group |
| Operating mode | 100% operating factor |
| Product family | PLC-INTERFACE |
| Article revision | 07 |
| Contact material | AgSnO, hard gold-plated |
| Drive (polarity) | polarized |
| Stripping length | 8 mm |
| Connection method | Screw connection |
| Mounting position | any |
| Tightening torque | 0.6 Nm ... 0.8 Nm |
| Drive and function | monostable |
| Protective circuit | Reverse polarity protection; Polarity protection diode |
| Switching capacity | 2 A (at 24 V, DC13) |
| Degree of pollution | 3 |
| Input voltage range | 37.4 V DC ... 60 V DC (20 °C) |
| Overvoltage category | III |
| Typical release time | 8 ms |
| Low Voltage Directive | Conformance with Low Voltage Directive |
| Short-circuit current | 200 A (conditional short-circuit current) |
| Standards/regulations | IEC 60947-5-1 |
| Typical response time | 5 ms |
| Contact switching type | 1 changeover contact |
| Maximum inrush current | 50 mA |
| Min. switching current | 1 mA (24 V) |
| Type of switch contact | Single contact |
| Mechanical service life | 2x 107cycles |
| Nominal input voltage UN | 48 V DC |
| Rated insulation voltage | 250 V |
| Maximum switching voltage | 30 V AC |
| Minimum switching voltage | 100 mV (10 mA) |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 26 ... 14 |
| Limiting continuous current | 50 mA |
| Typical input current at UN | 9.2 mA |
| Date of last data management | 29.07.2024 |
| Conductor cross section rigid | 0.14 mm² ... 2.5 mm² |
| Electromagnetic compatibility | Conformance with EMC directive |
| Test voltage (Winding/contact) | 4 kV AC (50 Hz, 1 min., winding/contact) |
| Ambient temperature (operation) | -40 °C ... 60 °C |
| Rated impulse withstand voltage | 6 kV |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Degree of protection (Relay base) | IP20 (Relay base) |
| Interrupting rating (ohmic load) max. | 1.2 W (at 24 V DC) |
| Flammability rating according to UL 94 | V0 (Housing) |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Maximum power dissipation for nominal condition | 0.44 W |
| Nominal voltage (plugged-in electromechanical relay) | 24 V DC |
Product Description
PLC-INTERFACE, consisting of PLC-BSC.../21 base terminal block with screw connection and plug-in miniature relay with multilayer gold contact, for mounting on NS 35/7.5 rail, 1 switched contact, input
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
