In Stock Hot Product
PLC-RSC-12DC/ 1IC/ACT
PLC-RSC-12DC/ 1IC/ACT 1078800 PHOENIX CONTACT PLC-INTERFACE for high switch-on currents, consisting of PLC-B..
$0.00USD
3983 in stock
Key Specifications
GTIN:4055626794532
Orderkey:1078800
(General):2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
(Drawings):The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact.
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626794532 |
| Orderkey | 1078800 |
| (General) | 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) |
| (Drawings) | The system installer must ensure the touch protection of the product (at voltages > 25 V AC/60 V DC). The product is a built-in device without protection against direct contact. |
| (Coil side) | 6 A (at 250 V, AC15) |
| Catalog page | Page 382 (C-5-2019) |
| Depth (Note) | 94 mm |
| Packing unit | 1 pc |
| Width (Note) | 14 mm |
| (Dimensions) | ≥ IP54 (Installation location) |
| Height (Note) | 80 mm |
| Note (Drawings) | Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. |
| Country of origin | DE (Germany) |
| ETIM 5.0 (eCl@ss) | EC001437 |
| ETIM 6.0 (eCl@ss) | EC001437 |
| ETIM 7.0 (eCl@ss) | EC001437 |
| (Connection data) | 2x 0.5 mm² ... 1.5 mm² (TWIN ferrule) |
| (Connection data 2) | EN 61810-1 |
| Custom tariff number | 85364190 |
| (Ambient conditions) | Free-wheeling diode Damping diode |
| Screw thread (General) | M 3 |
| Contact type (Coil side) | 1 N/O contact |
| Connection name (General) | Coil side |
| Stripping length (General) | 8 mm |
| Connection method (General) | Screw connection |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Contact material (Coil side) | AgSnO2 |
| eCl@ss 8.0 (Classifications) | 27371601 |
| eCl@ss 9.0 (Classifications) | 27371601 |
| Maximum altitude (Dimensions) | ≤ 2000 m |
| Operating mode (Contact side) | 100% operating factor |
| Insulation (Connection data 2) | Safe isolation, reinforced insulation |
| Screw thread (Connection data) | M3 |
| Switching capacity (Coil side) | 2 A (at 24 V, DC13) |
| Designation (Connection data 2) | Standards/regulations |
| Mounting position (Contact side) | any |
| Coil voltage (Ambient conditions) | 12 V DC |
| Connection name (Connection data) | Contact side |
| Degree of protection (Dimensions) | RT II (Relay) |
| Maximum inrush current (Coil side) | 80 A (for 20 ms) |
| Min. switching current (Coil side) | 100 mA (at 12 V DC) |
| Stripping length (Connection data) | 8 mm |
| Type of switch contact (Coil side) | Single contact |
| Utilization restriction (Drawings) | EMC: class A product, see manufacturer's declaration in the download area |
| Connection method (Connection data) | Screw connection |
| Switching capacity min. (Coil side) | 1200 mW |
| Assembly instructions (Contact side) | In rows with zero spacing |
| Pollution degree (Connection data 2) | 2 |
| Weight per Piece (excluding packing) | 0.000 g |
| Conductor cross section AWG (General) | 26 ... 14 |
| Maximum switching voltage (Coil side) | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage (Coil side) | 12 V (at 100 mA) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Mechanical service life (Contact side) | 3x 107cycles |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Conductor cross section solid (General) | 0.14 mm² ... 2.5 mm² |
| Limiting continuous current (Coil side) | 6 A |
| Protective circuit (Ambient conditions) | Reverse polarity protection Polarity protection diode |
| Rated surge voltage (Connection data 2) | 6 kV |
| Overvoltage category (Connection data 2) | III |
| Standards/regulations (Connection data 2) | EN 50178 |
| Typical release time (Ambient conditions) | 10 ms |
| Conductor cross section flexible (General) | 0.14 mm² ... 2.5 mm² |
| Typical response time (Ambient conditions) | 8 ms |
| Ambient temperature (operation) (Dimensions) | -40 °C ... 60 °C |
| Rated insulation voltage (Connection data 2) | 250 V AC |
| Conductor cross section AWG (Connection data) | 26 ... 14 |
| Nominal input voltage UN (Ambient conditions) | 12 V DC |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Conductor cross section solid (Connection data) | 0.14 mm² ... 2.5 mm² |
| Typical input current at UN (Ambient conditions) | 33 mA |
| Interrupting rating (ohmic load) max. (Coil side) | 144 W (at 24 V DC) |
| Conductor cross section flexible (Connection data) | 0.14 mm² ... 2.5 mm² |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Test voltage relay winding/relay contact (Contact side) | 4 kV AC (50 Hz, 1 min.) |
| Interrupting rating (ohmic load) max. bridged (Coil side) | 240 W (for 24 V DC. The value is permissible if both connections 13, both connections 14 and both connections BB are bridged.) |
| Power dissipation for nominal condition (Ambient conditions) | 0.4 W |
| DiagramBasic behavior of capacitive loads:- Very high inrush current- Voltage increases with an e-function (Drawings) | |
| DiagramCurve AMaximum permissible continuous voltage Umaxwith limiting continuous current on the contact side (see relevant technical data)Curve BMinimum permissible operate voltage Uopafter pre-excitation (see relevant technical data) (Drawings) |
Product Description
PLC-INTERFACE for high clamping currents, consisting of PLC-BSC.../1 IC/ACT base terminal block with push-in connection and plug-in miniature relay, for mounting on NS 35/7.5 rail, max. clamping curre
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
DiagramCurve AMaximum permissible continuous voltage Umaxwith limiting continuous current on the contact side (see relevant technical data)Curve BMinimum permissible operate voltage Uopafter pre-excitation (see relevant technical data)
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
