In Stock Hot Product
PLC-RPT-60DC/21HC
PLC-RPT- 60DC/21HC 2900295 PHOENIX CONTACT PLC-INTERFACE for high continuous currents, consisting of PLC-BPT..
$0.00USD
3560 in stock
Key Specifications
:Free-wheeling diode Damping diode
Depth:94 mm
Width:14 mm
Height:80 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Free-wheeling diode Damping diode | |
| Depth | 94 mm |
| Width | 14 mm |
| Height | 80 mm |
| Designation | Standards/regulations |
| Contact type | 1 PDT |
| Operating mode | 100% operating factor |
| Connection name | Coil side |
| Contact material | AgNi |
| Pollution degree | 2 |
| Stripping length | 8 mm |
| Connection method | Push-in connection |
| Mounting position | any |
| Protective circuit | Protection against polarity reversal Polarity protection diode |
| Degree of protection | RT II (Relay) |
| Overvoltage category | III |
| Typical release time | 10 ms |
| Assembly instructions | In rows with zero spacing |
| Standards/regulations | IEC 60664 |
| Typical response time | 8 ms |
| Maximum inrush current | 30 A (300 ms) |
| Min. switching current | 10 mA (at 12 V) |
| Mechanical service life | 3 x 107cycles |
| Nominal input voltage UN | 60 V DC |
| Maximum switching voltage | 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) |
| Minimum switching voltage | 12 V (at 10 mA) |
| Operating voltage display | Yellow LED |
| Conductor cross section AWG | 26 ... 14 |
| Limiting continuous current | 10 A |
| Typical input current at UN | 10 mA |
| Conductor cross section solid | 0.14 mm² ... 2.5 mm² |
| Rated surge voltage/insulation | 6 kV / Safe isolation, increased insulation |
| Ambient temperature (operation) | -40 °C ... 60 °C |
| Conductor cross section flexible | 0.14 mm² ... 2.5 mm² |
| Interrupting rating (ohmic load) max. | 240 W (at 24 V DC) |
| Flammability rating according to UL 94 | V0 |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Power dissipation for nominal condition | 0.6 W |
| Interrupting rating (ohmic load) max. bridged | 144 W (for 24 V DC. Value applies to connections 12. If connections 12 are bridged, the normal value applies.) |
| Switching capacity in acc. with DIN VDE 0660/IEC 60947 | 2 A (at 24 V, DC13) |
Product Description
PLC-INTERFACE for high constant currents, consisting of PLC-BPT.../21 HC base terminal block with push-in connection and plug-in miniature relay, for mounting on NS 35/7.5 rail, constant current limit
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
