In Stock Hot Product
PLC-OPT-24DC/TTL
PLC-OPT- 24DC/TTL 2900363 PHOENIX CONTACT PLC solid-state relay with Push-in connection, for mounting on DIN..
$0.00USD
4414 in stock
Key Specifications
(General):IEC 62103
Depth (Note):86 mm
Width (Note):6.2 mm
(Input data):Surge protection
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| (General) | IEC 62103 |
| Depth (Note) | 86 mm |
| Width (Note) | 6.2 mm |
| (Input data) | Surge protection |
| Height (Note) | 80 mm |
| UNSPSC 11 (ETIM) | 39121542 |
| ETIM 4.0 (eCl@ss) | EC000196 |
| ETIM 5.0 (eCl@ss) | EC001504 |
| UNSPSC 13.2 (ETIM) | 39121542 |
| UNSPSC 6.01 (ETIM) | 30211916 |
| UNSPSC 12.01 (ETIM) | 39121542 |
| Fan out (Input data) | 1 |
| UNSPSC 7.0901 (ETIM) | 39121542 |
| (Ambient conditions) | Surge protection |
| Designation (General) | Air clearances and creepage distances between the power circuits |
| Utilization restriction | EMC: class A product, see manufacturer's declaration in the download area |
| Designation (Input data) | Output data |
| Output circuit (Input data) | 3-conductor, ground-referenced |
| Connection name (Output data) | Input side |
| Degree of pollution (General) | 2 |
| Overvoltage category (General) | III |
| Stripping length (Output data) | 8 mm |
| (Connection data, output side) | IEC 62103 |
| Connection method (Output data) | Push-in connection |
| Standards/regulations (General) | IEC 60664 |
| Type of protection (Input data) | Reverse polarity protection |
| Degree of protection (Dimensions) | IP20 |
| Rated insulation voltage (General) | 250 V DC |
| Output nominal voltage (Input data) | 5 V DC -10 % ... +20 % |
| Surge voltage protection (Input data) | > 8 V |
| eCl@ss 4.0 (Standards and Regulations) | 27371001 |
| eCl@ss 4.1 (Standards and Regulations) | 27371001 |
| eCl@ss 5.0 (Standards and Regulations) | 27371001 |
| eCl@ss 5.1 (Standards and Regulations) | 27371001 |
| eCl@ss 6.0 (Standards and Regulations) | 27371001 |
| eCl@ss 7.0 (Standards and Regulations) | 27371001 |
| eCl@ss 8.0 (Standards and Regulations) | 27371604 |
| eCl@ss 9.0 (Standards and Regulations) | 27371604 |
| Type of protection (Ambient conditions) | Reverse polarity protection |
| Limiting continuous current (Input data) | A TTL load (Fan out = 1)/50 mA for switching mode |
| Rated surge voltage/insulation (General) | 4 kV / basic insulation |
| Conductor cross section AWG (Output data) | 26 ... 14 |
| Protective circuit/component (Input data) | Parallel polarity protection diode |
| Connection in acc. with standard (General) | CUL |
| Designation (Connection data, output side) | Air clearances and creepage distances between the power circuits |
| Typical response time (Ambient conditions) | 35 µs |
| Typical turn-off time (Ambient conditions) | 35 µs |
| Conductor cross section solid (Output data) | 0.14 mm² ... 2.5 mm² |
| Transmission frequency (Ambient conditions) | 1 kHz |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 60 °C |
| Connection name (Connection data, input side) | Output side |
| Nominal input voltage UN (Ambient conditions) | 24 V DC |
| Operating mode (Connection data, output side) | 100% operating factor |
| Surge voltage protection (Ambient conditions) | > 33 V |
| Conductor cross section flexible (Output data) | 0.14 mm² ... 2.5 mm² |
| Operating voltage display (Ambient conditions) | Yellow LED |
| Stripping length (Connection data, input side) | 8 mm |
| Connection method (Connection data, input side) | Push-in connection |
| Flammability rating according to UL 94 (General) | V0 |
| Mounting position (Connection data, output side) | any |
| Typical input current at UN (Ambient conditions) | 3.4 mA |
| Protective circuit/component (Ambient conditions) | Parallel polarity protection diode |
| Degree of pollution (Connection data, output side) | 2 |
| Overvoltage category (Connection data, output side) | III |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Assembly instructions (Connection data, output side) | In rows with zero spacing |
| Standards/regulations (Connection data, output side) | IEC 60664 |
| Rated insulation voltage (Connection data, output side) | 250 V DC |
| Test voltage input/output (Connection data, output side) | 2.5 kVrms(50 Hz, 1 min.) |
| Conductor cross section AWG (Connection data, input side) | 26 ... 14 |
| Conductor cross section solid (Connection data, input side) | 0.14 mm² ... 2.5 mm² |
| Input voltage range in reference to UN (Ambient conditions) | 0.8 ... 1.2 |
| Rated surge voltage/insulation (Connection data, output side) | 4 kV / basic insulation |
| Voltage drop at max. limiting continuous current (Input data) | < 80 mV |
| Conductor cross section flexible (Connection data, input side) | 0.14 mm² ... 2.5 mm² |
| Flammability rating according to UL 94 (Connection data, output side) | V0 |
| Switching threshold "0" signal in reference to UN (Ambient conditions) | < 0.4 |
| Switching threshold "1" signal in reference to UN (Ambient conditions) | > 0.8 |
Product Description
PLC-INTERFACE for TTL signal, consisting of PLC-O.../TTL base terminal block with push-in connection and integrated solid-state relay, for installation on NS 35/7.5 rail, 1 closing contact, input: 24
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
