PLC-OPT-120UC/230AC/1

Parameter	Value
	110 V DC
Depth	94 mm
Width	6.2 mm
Height	80 mm
Operating mode	100% operating factor
Output circuit	2-wire, floating
Connection name	Input side
Leakage current	< 1 mA (in off state)
Max. load value	4.5 A2s
Pollution degree	2
Stripping length	8 mm
Connection method	Push-in connection
Min. load current	10 mA
Mounting position	any
Type of protection	Bridge rectifier
Output voltage range	24 V AC ... 253 V AC
Overvoltage category	III
Assembly instructions	In rows with zero spacing
Typical response time	10 ms (at UN)
Typical turn-off time	10 ms (at UN)
Maximum inrush current	30 A (10 ms)
Transmission frequency	3 Hz
Nominal input voltage UN	120 V AC (110 V DC)
Operating voltage display	Yellow LED
Test voltage input/output	2.5 kV (50 Hz, 1 min.)
Conductor cross section AWG	26 ... 14
Limiting continuous current	0.75 A (see derating curve)
Typical input current at UN	4 mA
Protective circuit/component	Bridge rectifier
Conductor cross section solid	0.14 mm² ... 2.5 mm²
Ambient temperature (operation)	-25 °C ... 60 °C
Conductor cross section flexible	0.14 mm² ... 2.5 mm²
Flammability rating according to UL 94	V0
Input voltage range in reference to UN	0.9 ... 1.1
Ambient temperature (storage/transport)	-25 °C ... 70 °C
Voltage drop at max. limiting continuous current	< 1 V
Switching threshold "0" signal in reference to UN	≤ 0.25
Switching threshold "1" signal in reference to UN	≥ 0.8

More details

Technical specifications and performance data

Installation and operation guide

PLC-OPT-120UC/230AC/1 2900372 PHOENIX CONTACT PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal bloc..