In Stock Hot Product
PC 6/ 4-G1-7,62 BK
PC 6/ 4-G1-7,62 BK 1717018 PHOENIX CONTACT Printed-circuit board connector
$0.00USD
4420 in stock
Key Specifications
GTIN:4055626514956
Note:Made to Order (non-returnable)
Orderkey:1717018
Packing unit:25 pc
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626514956 |
| Note | Made to Order (non-returnable) |
| Orderkey | 1717018 |
| Packing unit | 25 pc |
| Country of origin | CN (China) |
| Custom tariff number | 85366930 |
| (Ambient conditions) | Test passed |
| Minimum order quantity | 25 pc |
| Result (Pull-out test) | Test passed |
| Pitch (Key Commercial Data) | 7.62 mm |
| No. of cycles (Pull-out test) | 25 |
| Specification (Pull-out test) | IEC 60512-15-1:2008-05 |
| Pitch (Material data - housing) | 7.62 mm |
| Rated current (Item properties) | 41 A |
| Dimensional test (Pull-out test) | Test passed IEC 60512-1-2:2002-02 |
| Test result (Ambient conditions) | Test passed |
| Cold stress (Durability tests (B)) | -40 °C/2 h |
| Specification (Climatic tests (D)) | IEC 61984:2008-10 |
| Specification (Temperature cycles) | IEC 61984 |
| Test specification (Pull-out test) | IEC 61984 |
| Visual examination (Pull-out test) | Test passed IEC 60512-1-1:2002-02 |
| Mounting type (Key Commercial Data) | Wave soldering |
| Test force per pos. (Pull-out test) | 20 N |
| (Termination and connection method) | Test passed |
| Plug-in system (Key Commercial Data) | POWER COMBICON 6 |
| Specification (Durability tests (B)) | ISO 6988:1985-02 |
| Specification (Mechanical tests (A)) | IEC 60512-9-1:2010-03 |
| Weight per Piece (excluding packing) | 10.720 g |
| Dimension a (Material data - housing) | 22.86 mm |
| Resistance of marking (Pull-out test) | Test passed IEC 60068-2-70:1995-12 |
| Thermal stress (Durability tests (B)) | 100 °C/168 h |
| Type of contact (Key Commercial Data) | Male connector |
| Width [ w ] (Material data - housing) | 30.88 mm |
| Height [ h ] (Material data - housing) | 16.1 mm |
| Length [ l ] (Material data - housing) | 28.2 mm |
| Number of levels (Key Commercial Data) | 1 |
| Corrosive stress (Durability tests (B)) | 0.2 dm3SO2on 300 dm3/40 °C/1 cycle |
| Polarization and coding (Pull-out test) | Test passed IEC 60512-13-5:2006-02 |
| Range of articles (Key Commercial Data) | PC 6/..-G1 |
| Contact material (Electrical parameters) | Cu alloy |
| Pin dimensions (Material data - housing) | 0.8 x 1 mm |
| Solder pin [P] (Material data - housing) | 2.6 mm |
| Number of positions (Key Commercial Data) | 4 |
| Contact resistance R1 (Mechanical tests (A)) | 0.7 mΩ |
| Contact resistance R2 (Mechanical tests (A)) | 0.7 mΩ |
| Insulating material (Material data - contact) | PA GF |
| Rated surge voltage (III/2) (Item properties) | 6 kV |
| Conductor connection test (Ambient conditions) | The stripped-off ends of the largest conductor can be completely inserted in the opening of the terminal point without using excessive force. |
| Type of packaging (Dimensions for the product) | packed in cardboard |
| Brief article description (Key Commercial Data) | Printed-circuit board connector |
| Pieces per package (Dimensions for the product) | 25 |
| Surface characteristics (Electrical parameters) | Tin-plated |
| Voltage (Mechanical tests according to standard) | 630 V |
| Pull-out test (Termination and connection method) | IEC 60998-2-3:2002-12 |
| Insertion/withdrawal cycles (Mechanical tests (A)) | 25 |
| Rated insulation voltage (III/2) (Item properties) | 630 V |
| Withdraw strength per pos. approx. (Pull-out test) | 16 N |
| Insertion strength per pos. approx. (Pull-out test) | 13 N |
| Insulating material group (Material data - contact) | I |
| CTI according to IEC 60112 (Material data - contact) | 600 |
| Height (without solder pin) (Material data - housing) | 13.5 mm |
| Specification (Air clearances and creepage distances) | IEC 60998-2-3:2002-12 |
| Ambient temperature (assembly) (Packaging information) | -5 °C ... 100 °C |
| Specification (Mechanical tests according to standard) | IEC 60664-1:2007-04 |
| Ambient temperature (operation) (Packaging information) | -40 °C |
| Denomination packing units (Dimensions for the product) | Pcs. |
| Power-frequency withstand voltage (Durability tests (B)) | 4.26 kV |
| Power-frequency withstand voltage (Mechanical tests (A)) | 4.26 kV |
| Result, degree of protection, IP code (Climatic tests (D)) | Finger safety with IP20 test finger |
| Temperature cycles (Air clearances and creepage distances) | 384 |
| Impulse withstand voltage at sea level (Durability tests (B)) | 9.8 kV |
| Impulse withstand voltage at sea level (Mechanical tests (A)) | 9.8 kV |
| Test for conductor damage and slackening (Ambient conditions) | IEC 60998-2-3:2002-12 |
| Test – repeated connection and release (Ambient conditions) | IEC 60998-2-3:2002-12 |
| Metal surface contact area (top layer) (Electrical parameters) | Tin (2 - 4 µm Sn) |
| Ambient temperature (storage/transport) (Packaging information) | -40 °C ... 70 °C |
| Flammability rating according to UL 94 (Material data - contact) | V0 |
| Metal surface soldering area (top layer) (Electrical parameters) | Tin (2 - 4 µm Sn) |
| Test specification (Current carrying capacity / derating curves) | IEC 61984 |
| Metal surface contact area (middle layer) (Electrical parameters) | Nickel (1.3 - 3 µm Ni) |
| Insulating material group (Mechanical tests according to standard) | I |
| Metal surface soldering area (middle layer) (Electrical parameters) | Nickel (1.3 - 3 µm Ni) |
| Rated surge voltage (II/2) (Mechanical tests according to standard) | 6 kV |
| Rated surge voltage (III/2) (Mechanical tests according to standard) | 6 kV |
| Rated surge voltage (III/3) (Mechanical tests according to standard) | 6 kV |
| Rated insulation voltage (II/2) (Mechanical tests according to standard) | 1000 V |
| Rated insulation voltage (III/2) (Mechanical tests according to standard) | 630 V |
| Rated insulation voltage (III/3) (Mechanical tests according to standard) | 630 V |
| Test current (minimum cross section) (Air clearances and creepage distances) | 32 A DC |
| Withdraw strength per pos. approx. (Current carrying capacity / derating curves) | 16 N |
| Insertion strength per pos. approx. (Current carrying capacity / derating curves) | 13 N |
| Contact holder in insert requirements >20 N (Current carrying capacity / derating curves) | Test passed |
| Polarization when inserted requirement >20 N (Current carrying capacity / derating curves) | Test passed |
| Conductor cross section / conductor type / tensile force (Termination and connection method) | 16 mm² / flexible / > 100 N |
Product Description
More details
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
