In Stock Hot Product
PC 6/ 2-ST-BUS-7,62
PC 6/ 2-ST-BUS-7,62 1044740 PHOENIX CONTACT Connector for printed circuit board, nominal current: 32 A, numb..
$0.00USD
3865 in stock
Key Specifications
Link:Insulation displacement connection
Step:7.62 mm
note:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Result:Test passed
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Link | Insulation displacement connection |
| Step | 7.62 mm |
| note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Packaging | Packed in carton |
| Width [w] | 24.4 mm |
| Height [h] | 58 mm |
| Length [l] | 28.75 mm |
| Sweep Speed | 1 octave/min |
| Temperature | 850 °C |
| Acceleration | 50 m/s² (60.1 Hz ... 150 Hz) |
| Color (Case) | Green (6021) |
| Product Line | COMBICON Connectors L |
| Product Type | Printed circuit board connector |
| Clamping Type | absent |
| Fixing flange | absent |
| Article review | 02 |
| Number of rows | 1 |
| Product Family | PC 6/.. -ST-BUS |
| Surface Finish | Hot-dip galvanizing |
| Number of poles | 2 |
| Test Directions | X, Y, and Z axis |
| Connector system | COMBICON PC 6 |
| Contact Material | Cu Alloy |
| Fixed AC voltage | 4.26 kV |
| Mass Resistivity | 0.7 mΩ |
| Number of cycles | 25 |
| Rated Current IN | 32 A |
| Rated voltage UN | 1000 V |
| Tightening torque | 3 Nm |
| Manoeuvring cycles | 25 |
| Note for Operation | According to DIN EN 61984, COMBICON connectors are connectors without switchable power (COC). For use in accordance with the intended use, they must not be switched on or disconnected while they are still live or under load. |
| Test Specification | DIN EN 60998-2-3 (VDE 0613-2-3):2005-03 |
| Dimensioned Drawing | |
| Insulation material | PA |
| Mass Resistivity R1 | 0.7 mΩ |
| Mass Resistivity R2 | 0.7 mΩ |
| Number of potentials | 2 |
| Nominal cross-section | 16 mm² |
| Number of connections | 2 |
| Sizing voltage (II/2) | 1000 V |
| Colour (Drive Element) | Orange (2003) |
| Number of poles tested | 3 |
| Sizing voltage (III/2) | 1000 V |
| Sizing voltage (III/3) | 1000 V |
| Test duration per axle | 2.5 h |
| Contact Connection Type | female |
| Duration of application | 5 s |
| Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Appliance type screw head | Torx® (T15) |
| Insulation Material Group | The |
| CTI according to IEC 60112 | 600 |
| Rated Impulse Voltage (II/2) | 6 kV |
| Minimum creepage value (II/2) | 5.5 mm |
| Rated impulse voltage (III/2) | 8 kV |
| Rated impulse voltage (III/3) | 8 kV |
| Sizing Impulse Voltage (II/2) | 6 kV |
| Ambient temperature (mounting) | -5 °C ... 40 °C (depending on conductor insulation) |
| Minimum creepage value (III/2) | 8 mm |
| Minimum creepage value (III/3) | 12.5 mm |
| Rated Isolation Voltage (II/2) | 1000 V |
| Sizing Impulse Voltage (III/2) | 8 kV |
| Sizing impulse voltage (III/3) | 8 kV |
| Tensile force per pole approx. | 16 N |
| Ambient temperature (operating) | -40 °C ... 100 °C (depending on derating curve) |
| Rated Isolation Voltage (III/2) | 1000 V |
| Flexible conductor cross-section | 16 mm² (H07V-K / Maximum Outer Diameter 8.1 mm) |
| Insertion force per pole approx. | 13 N |
| Rated insulation voltage (III/3) | 1000 V |
| Stress due to the effect of heat | 100 °C/168 h |
| Conductor/board connection direction | 0 ° |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Combustibility class according to UL 94 | V0 |
| Vertical impulse tension above sea level | 9.8 kV |
| Relative humidity (transport and storage) | 30 % ... 70 % |
| Metal surface contact zone (surface layer) | Tin (4 - 8 μm Sn) |
| Insulation Resistance Between Contiguous Poles | > 5 MΩ |
| Metal Surface, Connection Point (Surface Layer) | Tin (4 - 8 μm Sn) |
| Minimum creepage value - inhomogeneous range (II/2) | 5.5 mm |
| Minimum creepage value - inhomogeneous range (III/2) | 8 mm |
| Minimum clearance value - inhomogeneous range (III/3) | 8 mm |
| Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Brinell hardness test temperature according to EN 60695-10-2 | 125 °C |
| GWIT filament ignition temperature according to EN 60695-2-13 | 775 |
| Flammability index of GWFI filament according to EN 60695-2-12 | 850 |
| Conductor cross-section/conductor type/tensile force nominal value/actual value | 16 mm² / flexible / > 100 N |
Product Description
Connector for printed circuit board, nominal section: 16 mm², color: green, nominal current: 32 A, nominal voltage (III/2): 1000 V, contact surface: Tin, contact type: Female, number of potentials: 2,
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
