In Stock Hot Product
PACT RCP-4000A-1A-D140-3M-UV
PACT RCP-4000A-1A-D140-3M-UV 1058044 PHOENIX CONTACT Set consisting of one 1 A measuring transducer and one ..
$0.00USD
3227 in stock
Key Specifications
GTIN:4055626702261
Orderkey:1058044
Catalog page:Page 224 (C-5-2019)
Packing unit:1
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4055626702261 |
| Orderkey | 1058044 |
| Catalog page | Page 224 (C-5-2019) |
| Packing unit | 1 |
| (Dimensions) | -25 °C ... 85 °C (Measuring transducer) |
| ETIM 6.0 (eCl@ss) | EC002048 |
| ETIM 7.0 (eCl@ss) | EC002048 |
| (Connection data) | IV (600 V, to neutral conductor) |
| Custom tariff number | 85437090 |
| Torque (General data) | 0.5 Nm ... 0.6 Nm |
| Depth (Key Commercial Data) | 70.4 mm |
| Screw thread (General data) | M3 |
| Width (Key Commercial Data) | 22.5 mm |
| (Measuring coil input data) | 107 m (2.5 mm² (AWG 14)) |
| (Standards and Regulations) | For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
| Height (Key Commercial Data) | 85 mm |
| Insulation (Connection data) | double insulation |
| eCl@ss 4.0 (Classifications) | 27210900 |
| eCl@ss 4.1 (Classifications) | 27210900 |
| eCl@ss 5.0 (Classifications) | 27210900 |
| eCl@ss 5.1 (Classifications) | 27210900 |
| eCl@ss 6.0 (Classifications) | 27210900 |
| eCl@ss 7.0 (Classifications) | 27210902 |
| eCl@ss 9.0 (Classifications) | 27210902 |
| Maximum altitude (Dimensions) | < 2000 m |
| Connection name (General data) | Measuring transducer side |
| Stripping length (General data) | 7 mm |
| Connection method (General data) | Screw connection |
| Pollution degree (Connection data) | 2 |
| Load (Measuring coil signal output) | 0 Ω ... 1.5 Ω |
| (Measuring transducer signal output) | 600 V AC (rms CAT IV) |
| China RoHS (Standards and Regulations) | Environmentally Friendly Use Period = 50 |
| Overvoltage category (Connection data) | III (1000 V, to neutral conductor) |
| Power consumption (Ambient conditions) | 4 W |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Phase angle (Measuring coil input data) | < 1 ° |
| Rated power (Measuring coil input data) | 1.5 VA |
| Standards/regulations (Connection data) | IEC 61010-1 |
| (General data for measuring transducer) | 0.07 %/K (-20°C ... +10°C; both components have the same ambient temperature) |
| Conductor cross section AWG (General data) | 24 ... 14 |
| Nominal supply voltage (Ambient conditions) | 24 V DC -20 % ... +25 % |
| Test voltage (General data, measuring coil) | 1.5 kV AC (Supply/input and output: 50 Hz, 1 min) |
| Ambient temperature (operation) (Dimensions) | -30 °C ... 80 °C (Measuring coil) |
| Conductor cross section solid (General data) | 0.2 mm² ... 2.5 mm² |
| Position error (Measuring transducer supply) | < 1 % |
| Linearity error (Measuring transducer supply) | 0.1 % |
| Max. current consumption (Ambient conditions) | 190 mA |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % (non-condensing) |
| UL, USA/Canada (General data, measuring coil) | UL 508 Listed |
| Frequency range (General data, measuring coil) | 45 Hz ... 65 Hz |
| Linearity error (General data, measuring coil) | < 0.5 % (From the range end value) |
| Conductor cross section flexible (General data) | 0.2 mm² ... 2.5 mm² |
| Housing material (General data, measuring coil) | Polyamide |
| Insulation (Measuring transducer signal output) | double insulation |
| Measuring coil degree of protection (Dimensions) | IP67 (not assessed by UL) |
| Input impedance (Measuring transducer input data) | 27 kΩ (smallest measuring range) |
| Nominal supply voltage range (Ambient conditions) | 19.2 V DC ... 30 V DC |
| Test voltage (Measuring transducer signal output) | 10.45 kV (DC / 1 min.) |
| Coil material (Measuring transducer signal output) | Elastollan |
| Current consumption (General data, measuring coil) | < 190 mA (at 19.2 V) |
| Insulation (General data for measuring transducer) | double insulation |
| Basic accuracy (Measuring transducer signal output) | |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 80 °C (Measuring coil) |
| Current output signal (Measuring coil signal output) | 0 A AC ... 1 A |
| Configurable/programmable (Measuring coil input data) | Via DIP switches |
| Housing material (Measuring transducer signal output) | PC |
| Measuring ranges (current) (Measuring coil input data) | 100 A 250 A 400 A 630 A 1000 A 1500 A 2000 A 4000 A |
| Measuring transducer degree of protection (Dimensions) | IP20 |
| Frequency measuring range (Measuring transducer supply) | 40 Hz ... 20000 Hz |
| Max. detectable harmonics (General data, measuring coil) | < 2 kHz |
| Operating voltage display (General data, measuring coil) | Green LED |
| Input signal (at 50 Hz) (Measuring transducer input data) | 100 mV (1000 A) |
| Maximum transmission error (General data, measuring coil) | ≤ 0.5 % (From the range end value) |
| Length of signal cable (Measuring transducer signal output) | 3000 mm |
| Output signal (at 50 Hz) (Measuring transducer signal input) | 100 mV (no load, at 1,000 A) |
| Length of measuring coil (Measuring transducer signal output) | 450 mm |
| Rated insulation voltage (Measuring transducer signal output) | 1000 V AC (rms CAT III) |
| Standards/regulations (General data for measuring transducer) | IEC 61010-1 |
| Diameter of measuring coil (Measuring transducer signal output) | 8.3 mm ±0.2 mm |
| Typical measuring error (General data for measuring transducer) | < 1 % |
| Temperature coefficients (General data for measuring transducer) | 0.005 %/K (+10°C ... +70°C; both components have the same ambient temperature) |
| Conductor structure signal line (Measuring transducer signal output) | 2x 0.22 mm (Signal (tinned)) |
| Max. distances for copper cables at PN max (Measuring coil input data) | 32 m (0.75 mm² (AWG 20)) |
| Output voltage (in no-load operation) (Measuring transducer signal input) | VOUT= M * dI/dt |
| Output voltage (sinusoidal, in no-load operation) (Measuring transducer signal input) | 100 mV (VOUT= 2 * π * M * f * I (M = 0.318 μH; example: At 50 Hz; I = 1,000 A)) |
Product Description
Set consisting of a 1 A measurement transducer and a Rogowski coil resistant to ultraviolet rays with signal line. Rogowski coil length: 450 mm, diameter: 140 mm. Signal line length: 3 m. The coil mea
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
