In Stock Hot Product
ODLC-65-700
ODLC-65-700 MEANWELL AC-DC Constant Current mode (CC) LED driver with PFC, Input range 180-295VAC, Output 93..
$0.00USD
3874 in stock
Key Specifications
Name:ODLC-65-700
State:New
Format:Box
Series:ODLC-65
Supplier Information
MEANWELL
Products: 6448
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Name | ODLC-65-700 |
| State | New |
| Format | Box |
| Series | ODLC-65 |
| Dimming | 0-10V, 1-10V, PWM Signal 10V |
| Approvals | CCC, CE, ENEC, UL |
| Power (W) | 65,10 |
| Subformato | IP67 |
| Width (mm) | 77.00 |
| Height (mm) | 28.50 |
| AC input Max | 295,00 |
| AC input Min | 180,00 |
| Applications | Lighting |
| Manufacturer | MEAN WELL |
| Product type | LED Driver |
| Isolation (V) | 3.750,00 |
| Peak Power (W) | 65.1 |
| Input connector | Cable |
| Input frequency | 50 Hz, 60 Hz |
| Long/Background | 121.00 |
| Long Description | LED driver dimmable.Specially designed for powering LEDs directly in a steady stream.Format in box waterproof plasticIP67.Input range180-295Vca47-63Hz.Output in constant current700mA.Range of output voltage with current mode constant69 to 93Vccaccording to demand load.Maximum power:65,1 W.Efficiency typical:88%.Regulation0% to 100% of the output intensity with a slider0-10V / 1-10Vor a PWM signal of 10V with a frequency of 100Hz to 3KHz. With the regulation we can turn off the output, but we need a regulator 0-10V. Regulators 1-10V not arrive to give 0V do not shut down the output.Input class II without grounding.Factor corrector, power>0.95to 230vac at full load.Consumption without load <0.5 W.Operating temperature range of caseTcfrom-20ºCup+85ºC.Dimensions (Length x Width x Height):121 x 77 x 28.5 mm3 years of warranty.Manufacturer: MEAN WELL.The series ODLC are LED drivers designed to work directly with LEDs (plates LED or COBs), not with LED strips. Must be equipment that is fed in a steady stream. With plastic housing, waterproof IP67, designed for lighting applications in interior and exterior. Low ripple current, no flicker (flicker-free).This source works on a Constant Current when we connect the LEDs directly to have a voltage within the Range of Output Voltage mode Constant Current and a working current equal to the output current.These sources can be dimmed with dimmers assets or liabilities of0-10Vor1-10V, signal 10V PWM of 100Hz to 3KHz. Does not work with dimmers Triac dimmer cutting phase.(Not to be confused with regulators TRIACs, cutting phase. This driver cannot be regular with a Triac).With potentiometers assets that you can give 0V to shut down the output without the need of a switch. Dimmers 1-10V we can only reach 10% of regulation without shutting down the output. If you want to regular LED strips, we recommend the series ODLV or PWM.Compatible with any regulator 0-10V or 1-10V-market both assets and liabilities. Does not work with dimmers Triac dimmer cutting phase.Some compatible models tested are:MEAN WELL DAP-04-S01 (compatible with any push button normally open)SIMON: 75317BJC: 5TC8 425LEGRAND: 0784 04ABB- "NIESSEN": N2260.9SIEMENS: 5TC8424EFAPEL: Model 21210LED BOX: Model LD1160188OSRAM: Model DIM MCUJUNG: Model 240-10We can put about 20 sources for each regulator. The maximum distance is 100 meters between the regulator and the driver. |
| Output connector | Cable |
| Type of Entry CA | Single-phase |
| Warranty (Years) | 3,00 |
| Country of Origin | China |
| Output current mA | Seven hundred |
| Intensity of Minimum Output (mA) | 700,00 |
| Intensity of Output Maximum (mA) | 700,00 |
Product Description
More details
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Technical Details
LED driver dimmable.
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
